• New
18 Hex Locknut for TAO...
  • 18 Hex Locknut for TAO...

18 Hex Locknut for TAO MOTORS RAPTOR ATV

$5.99
Il n'y a pas encore d'avis.
105276 – Genuine OEM M8 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

Genuine TAO MOTORS OEM M8 hex locknut designed to replace a worn, damaged, or missing locking nut on your RAPTOR 125 ATV.

This original replacement fastener features a self-locking design that helps resist loosening caused by vibration and mechanical movement during ATV operation.

With its nominal M8 thread diameter, this locknut is intended for compatible mechanical assemblies requiring the original locking fastener.

Ideal for ATV maintenance, frame repairs, and mechanical fastening applications while preserving original equipment specifications.

Sold individually. Price is for one M8 hex locknut only.

Available at EcoBike Canada, your source for genuine TAO MOTORS ATV replacement parts.

 

Security garantes

 

Quick delivery

105276 – Genuine OEM M8 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

The TAO MOTORS M8 hex locknut, OEM part number 105276, is a genuine replacement fastener intended for compatible RAPTOR 125 ATV mechanical assemblies.

Also known as a self-locking hex nut, this component features a nominal M8 metric thread and a locking design that provides additional resistance to loosening.

ATVs are regularly exposed to vibration, movement, and mechanical stress during normal operation. Maintaining the correct fastening components is important for preserving the original equipment assembly configuration.

A properly installed hex locknut helps resist unwanted rotation and loosening when used in an assembly designed for this type of fastener.

Replacing a worn, corroded, damaged, or ineffective locknut with the correct OEM component helps maintain the intended mechanical connection.

Why Choose This Genuine TAO MOTORS OEM Hex Locknut?

  • Genuine TAO MOTORS / TAOTAO OEM replacement part.
  • Manufacturer part number: 105276.
  • Nominal metric thread diameter: M8.
  • Hexagonal self-locking design.
  • Helps resist loosening caused by vibration.
  • Intended for compatible RAPTOR 125 mechanical assemblies.
  • Replaces a worn, damaged, or missing locknut.
  • Maintains the original equipment fastening configuration.
  • Ideal for routine maintenance and mechanical repairs.
  • Sold individually: one hex locknut only.

Technical Specifications

  • Brand: TAO MOTORS / TAOTAO
  • OEM part number: 105276
  • Part type: Hex locknut
  • Alternative name: Self-locking hex nut
  • Nominal thread diameter: M8 (8 mm)
  • Thread pitch: Verify against the original fastener
  • Thread type: Metric
  • Shape: Hexagonal
  • Function: Mechanical fastening with resistance to loosening
  • Exact locking mechanism: Verify against the physical component
  • System: Frame and mechanical fastening assemblies
  • Quality: Genuine OEM replacement part
  • Compatibility: TAO MOTORS RAPTOR 125 ATV requiring OEM part 105276
  • Package quantity: 1 hex locknut

What Is a Hex Locknut Used For?

A hex locknut is designed to provide additional resistance to loosening compared with a conventional hex nut.

It is used in compatible mechanical assemblies exposed to vibration where the manufacturer specifies a self-locking fastener.

Its locking feature helps maintain the intended fastening arrangement but does not replace the correct tightening torque or installation procedure.

Always confirm that the nut matches the original thread diameter, thread pitch, and fastening requirements.

Standard Hex Nut vs. Hex Locknut

A standard hex nut secures components using a conventional threaded fastening connection.

A hex locknut includes an additional design feature intended to resist unwanted rotation and loosening.

OEM part number 105276 is specifically identified as a locknut and should not be replaced with a standard hex nut without confirming the manufacturer's requirements.

When Should You Replace a Hex Locknut?

Inspect the locknut and related mounting components if you notice:

  • A missing locknut.
  • Stripped or damaged internal threads.
  • Reduced locking resistance.
  • Rounded hexagonal faces.
  • Visible deformation.
  • Significant corrosion.
  • Cracks or other physical damage.
  • Unusual loosening during ATV operation.
  • A fastener that cannot be tightened correctly.

Replacement may also be required after disassembly when the manufacturer specifies a new self-locking nut.

Installation and Maintenance

Before performing any work, shut off the engine, remove the ignition key, and secure the ATV.

Compare the replacement locknut with the original component, including its M8 nominal size, thread pitch, and locking configuration.

Inspect the corresponding bolt or threaded shaft for damaged threads, corrosion, or deformation.

Install the locknut according to the manufacturer's service instructions and use the required tightening specifications.

Do not reuse a self-locking nut that has lost its intended locking resistance.

TAO MOTORS RAPTOR 125 ATV Compatibility

OEM part number 105276 is listed for mechanical fastening applications on the TAO MOTORS RAPTOR 125 ATV.

Before purchasing, verify:

  • Original OEM part number: 105276.
  • Nominal M8 thread diameter.
  • Correct thread pitch.
  • Original self-locking nut design.
  • Mounting position on the vehicle parts diagram.

Important: Sold separately, individually. Each quantity ordered includes one M8 hex locknut only.

Bolts, washers, and additional fastening components are sold separately.

Why Buy from EcoBike Canada?

EcoBike Canada specializes in ATVs, off-road vehicles, and genuine TAO MOTORS OEM replacement parts.

We supply original hex locknuts, standard hex nuts, bolts, washers, cotter pins, and frame components to help owners maintain and repair their RAPTOR 125 ATVs.

Choose genuine OEM replacement parts that match your vehicle's original fastening configuration.

Frequently Asked Questions

Is this a genuine OEM replacement part?
Yes. This hex locknut is offered as a genuine TAO MOTORS OEM replacement part, number 105276.

What is the locknut size?
The nominal metric thread diameter is M8, equivalent to 8 mm.

What is the purpose of a hex locknut?
It provides additional resistance to loosening in compatible mechanical assemblies exposed to vibration.

Does this nut have a nylon insert?
The exact self-locking mechanism must be verified against the physical component.

What is the thread pitch?
Confirm the exact pitch against the original nut or corresponding bolt.

Does this fit the TAO MOTORS RAPTOR 125?
Yes, for RAPTOR 125 configurations requiring OEM part number 105276.

Is this hex locknut sold individually?
Yes. The price includes one M8 hex locknut only.

Is the bolt included?
No. This listing includes the locknut only.

Can a standard hex nut replace this locknut?
Always use the manufacturer-specified fastening system. A standard hex nut may not provide the required resistance to loosening.

105276 – Écrou M8

Specific References