- New
Replacement fuel line kit designed for compatible TAO MOTORS RAPTOR 125 ATVs equipped with a carbureted gasoline engine.
This complete kit includes 30 cm of fuel hose, one universal inline fuel filter, and four 8 mm hose clamps.
The fuel hose carries gasoline through the fuel supply system, while the inline filter helps capture dirt and particles before they reach the carburetor.
Ideal for replacing a cracked, hardened, leaking, or damaged fuel line and a worn or clogged fuel filter.
6-piece kit: 1 fuel hose (30 cm), 1 fuel filter, and 4 clamps (8 mm).
Sold as one complete kit.
Available at EcoBike Canada, your source for TAO MOTORS ATV replacement parts.
Security garantes
Quick delivery
The TAO MOTORS fuel line kit, reference number 2015100, is a replacement fuel delivery kit intended for compatible gasoline-powered ATVs and dirt bikes.
This kit includes a 30 cm fuel hose, one universal inline fuel filter, and four 8 mm hose clamps, providing a convenient solution for replacing a section of the original fuel delivery system.
The fuel line carries gasoline between the appropriate fuel system components, while the inline filter helps capture contaminants before they enter the carburetor.
Over time, fuel hoses may become hardened, cracked, or damaged due to aging, heat, and vibration. Fuel filters may also become restricted as dirt and particles accumulate.
Replacing damaged components with correctly sized parts helps maintain a leak-free fuel system and proper fuel delivery to the engine.
The listed package contents correspond to the existing EcoBike product information for reference 2015100.
A fuel hose is an essential component of a carbureted engine's fuel delivery system.
Depending on the vehicle configuration, it carries gasoline between the fuel tank, fuel valve, inline filter, and carburetor.
The hose must be compatible with gasoline, correctly sized, and securely connected to the appropriate fittings.
A cracked, hardened, incorrectly routed, or loose fuel line may cause gasoline leaks or interfere with normal fuel delivery.
An inline fuel filter is installed in the fuel delivery system to capture certain contaminants present in gasoline.
It helps reduce the amount of dirt, rust particles, and other debris that may reach the carburetor.
Fuel contamination can interfere with carburetor operation and contribute to starting difficulties, unstable idling, or poor engine performance.
A clogged filter may also restrict gasoline flow and cause fuel starvation during engine operation.
Install the filter according to the manufacturer's flow direction markings when present.
Inspect the fuel line and filter if you notice:
Similar symptoms may also result from a defective carburetor, restricted fuel valve, blocked tank vent, or other fuel system problems.
Proper inspection is recommended before replacing components.
Before working on the fuel system, shut off the engine, remove the ignition key, and allow the vehicle to cool completely.
Perform all work in a well-ventilated area away from flames, smoking materials, hot surfaces, sparks, and other ignition sources.
Close the fuel valve when equipped and collect any gasoline using a suitable approved container.
Compare the replacement hose with the original fuel line to verify its inside diameter, required length, and compatibility with the vehicle's fuel fittings.
Install the inline filter according to the manufacturer's indicated direction of fuel flow.
Use the appropriate hose clamps to secure the connections. Route the fuel line away from hot engine and exhaust components, moving parts, and sharp edges.
Once installed, restore the fuel supply and carefully inspect every connection for leaks before starting the engine.
Never operate an ATV with a known gasoline leak.
Fuel line kit 2015100 is marketed for several compatible carbureted ATVs and dirt bikes in the 50cc to 250cc engine categories.
It is already listed in the EcoBike catalog for the TAO MOTORS REX 125.
This listing is prepared for RAPTOR 125 ATVs that use matching fuel hose and connection dimensions.
Before purchasing, verify:
Important: Sold as one complete kit. Each quantity ordered includes one 30 cm fuel hose, one universal inline fuel filter, and four 8 mm hose clamps.
The fuel tank, fuel valve, and carburetor are not included.
EcoBike Canada specializes in ATVs, dirt bikes, and TAO MOTORS replacement parts.
We offer gasoline hoses, inline fuel filters, fuel valves, fuel tanks, carburetors, and other components for maintaining compatible off-road vehicles.
Find the parts needed to maintain and repair your ATV's fuel delivery system.
What is included in kit 2015100?
The kit contains 30 cm of fuel hose, one universal fuel filter, and four 8 mm hose clamps.
How long is the fuel hose?
The listed hose length is 30 cm.
Is the inline fuel filter included?
Yes. One universal inline fuel filter is included.
Are hose clamps included?
Yes. The kit includes four 8 mm hose clamps.
What does the fuel filter do?
It helps capture dirt and particles in gasoline before they reach the carburetor.
Does this fit the TAO MOTORS RAPTOR 125?
It is suitable for compatible RAPTOR 125 fuel systems with matching hose and fitting dimensions. Verify the original connections before ordering.
Can this kit be used on other ATVs?
It is marketed for compatible 50cc to 250cc ATVs and dirt bikes. Actual fitment depends on hose and connection sizes.
Is this kit sold individually?
Yes. Each quantity ordered includes one complete kit containing the six listed components.
Is the carburetor included?
No. The carburetor, fuel valve, and gasoline tank are sold separately.