Genuine OEM castle nut designed for compatible mechanical and front suspension fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.
Features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.
Its slotted castle design allows the use of a cotter pin with a compatible drilled bolt or shaft to help prevent accidental loosening.
Ideal for replacing a worn, damaged or missing original castle nut while maintaining the factory fastening configuration.
Thread size: M10 x 1.25 mm.
Sold individually. Cotter pin not included.
Available at EcoBike Canada, your supplier of genuine TAO MOTORS replacement parts.
Security garantes
Quick delivery
The 105320 M10 x 1.25 Castle Nut is a genuine OEM TAO MOTORS replacement fastener intended for compatible mechanical and front suspension assemblies on the RAPTOR 125cc ATV.
This castellated nut features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.
Its upper section includes slots designed to accommodate a cotter pin when installed on a compatible drilled bolt or shaft.
When correctly installed and secured, the cotter pin helps prevent unintended nut rotation and loosening.
The 105320 castle nut is ideal for replacing a worn, damaged or missing original fastener while maintaining the factory mounting arrangement.
IMPORTANT: This product is sold individually. One castle nut is included per quantity ordered. Cotter pin and other mounting hardware are not included.
The front suspension system of an ATV includes mechanical components that require correctly specified fastening hardware.
Castle nuts are used in certain assemblies where an additional mechanical retaining device is required.
Unlike a regular hex nut, a castle nut features slots that allow a cotter pin to pass through the nut and a matching hole in the threaded shaft.
This arrangement helps prevent unintended rotation after the nut has been correctly tightened and secured.
Using the correct genuine OEM replacement part helps maintain the original fastening configuration.
The 105320 castle nut features a hexagonal body for installation with the appropriate tool and a slotted upper section.
The slots allow alignment with the cotter pin hole of a compatible drilled shaft or bolt.
Once a suitable cotter pin is installed, it provides an additional mechanical retaining feature.
If the original assembly requires a cotter pin, that retaining pin must be installed correctly during reassembly.
The nut and cotter pin work together as part of the intended fastening system.
The 105320 castle nut features the following specifications:
The 1.25 mm thread pitch is an essential specification when choosing the correct replacement nut.
Important: An M10 x 1.5 mm standard-thread nut is not interchangeable with this M10 x 1.25 mm castle nut.
Using the wrong thread pitch may damage the mating threads and compromise the fastening assembly.
Inspect the castle nut whenever the corresponding suspension or mechanical assembly is disassembled.
Replacement may be necessary if the original nut shows:
Inspect the cotter pin and mating threaded component at the same time to identify any additional damage.
Before installation, compare the replacement castle nut with the original component to verify the thread size and configuration.
Inspect the threaded shaft or bolt and confirm that its cotter pin hole is in good condition.
Tighten the nut according to the manufacturer's specifications and follow the prescribed procedure for aligning the castellated slots with the cotter pin hole.
Install a new cotter pin of the correct size whenever required by the assembly.
Because this type of fastening may be used in suspension or steering-related applications, inspect the complete assembly before operating the ATV.
This part number may also be used on other TAO MOTORS vehicles. Always compare the original part number, thread specifications and mounting application before ordering.
It is designed to secure a compatible mechanical assembly while allowing the use of a cotter pin to help prevent accidental loosening.
The nut features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.
A castle nut features slots for a cotter pin, while a locknut uses a different locking mechanism to resist loosening. These fastener types are not automatically interchangeable.
No. This product includes the castle nut only. A compatible cotter pin must be purchased separately when needed.
No. Part number 105320 requires a 1.25 mm thread pitch. An M10 x 1.5 nut has a different thread.
Yes. Part number 105320 is listed among the front suspension fasteners for the TAO MOTORS RAPTOR 125cc ATV.
Yes. This is a genuine OEM TAO MOTORS replacement fastener.
Yes. Each quantity ordered includes one castle nut. To purchase four nuts, select a quantity of four.
At EcoBike Canada, we offer a wide selection of genuine OEM replacement parts for TAO MOTORS ATVs.
Our inventory includes castle nuts, locknuts, bolts, cotter pins, washers, bushings, suspension arms and other fastening components for recreational vehicles.
Benefit from our customer service, replacement parts selection and experience with ATV maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.
www.eco-bike.ca