1 Handlebar Grip Set TAO...
  • 1 Handlebar Grip Set TAO...

1 Handlebar Grip Set TAO MOTORS RAPTOR 125 ATV

$19.99
Il n'y a pas encore d'avis.
112951 Handlebar Grip Set for TAO MOTORS RAPTOR 125 ATV

Genuine OEM handlebar grip set designed for compatible TAO MOTORS RAPTOR 125cc ATVs.

Includes left and right handlebar grips to replace worn or damaged original grips.

Provides a comfortable gripping surface and helps maintain control of the handlebars during recreational ATV riding.

Ideal for replacing cracked, torn, loose or deteriorated factory grips.

Helps restore the original handlebar appearance and rider comfort.

OEM part number: 112951.

Sold as a set – 2 handlebar grips: left and right.

Handlebar, throttle control, brake levers and cables not included.

Genuine TAO MOTORS OEM replacement parts available at EcoBike Canada.

 

Security garantes

 

Quick delivery

Handlebar Grip Set for TAO MOTORS RAPTOR 125 ATV

The 112951 Handlebar Grip Set is a genuine OEM TAO MOTORS replacement part designed for compatible handlebar assemblies on the RAPTOR 125cc ATV.

This set includes the left and right handlebar grips used at the ends of the ATV handlebars.

Handlebar grips provide the contact surfaces for the rider's hands, helping maintain a comfortable and secure hold during steering and recreational riding.

Over time, original grips may become worn, cracked, torn or loose due to regular use and exposure to outdoor conditions.

Replacing damaged grips helps restore the original handlebar configuration and improve rider comfort.

Part number 112951 is listed in TAO MOTORS replacement parts catalogs as Hand Grip Set.

IMPORTANT: This product is sold as a set containing two grips: one LEFT and one RIGHT. A quantity of 1 means one complete grip set, not one individual grip.

Why Choose the Genuine OEM 112951 Handlebar Grip Set?

  • Genuine OEM TAO MOTORS replacement parts.
  • Original part number: 112951.
  • Designed for compatible RAPTOR 125cc ATV handlebars.
  • Includes left and right handlebar grips.
  • Replaces worn or damaged original grips.
  • Provides comfortable gripping surfaces.
  • Helps maintain a secure hold on the handlebars.
  • Contributes to rider comfort during ATV operation.
  • Restores the original handlebar appearance.
  • Suitable for regular ATV maintenance.
  • Sold as a complete grip set.

Comfortable Handlebar Grip for Better Control

Handlebar grips are the main contact points between the rider's hands and the ATV handlebars.

They allow the rider to hold the handlebars during steering, maneuvering and travel across uneven recreational terrain.

ATV handlebars can transmit vibration and movement during operation.

Grips in good condition help maintain a consistent hand position and comfortable contact with the handlebars.

Worn or loose grips can become uncomfortable and may interfere with proper handlebar control.

Replacing deteriorated grips is therefore an important part of regular ATV maintenance.

Complete Left and Right Grip Set

Part number 112951 is identified as a Handlebar Grip Set.

The set includes the corresponding grips for both sides of the handlebars:

  • LEFT Handlebar Grip: Installed on the left handlebar position.
  • RIGHT Handlebar Grip: Installed on the right handlebar position according to the original throttle control configuration.

The left and right sides are determined while sitting on the ATV in the normal riding position and facing forward.

The right grip must be compatible with the vehicle's original throttle control arrangement.

One quantity ordered includes one complete set of two grips.

When Should Handlebar Grips Be Replaced?

ATV handlebar grips are exposed to friction, vibration, dust, mud and changing outdoor conditions.

Regular use may eventually cause the gripping surfaces to deteriorate.

Replacement may be necessary when the original grips show:

  • Visible cracks or splitting.
  • Torn or damaged grip surfaces.
  • Excessive surface wear.
  • Loose grips that rotate on their mounting surfaces.
  • Uncomfortable or deteriorated material.
  • Damage caused by a fall or impact.
  • A missing original grip.
  • General wear during a handlebar restoration.

Loose grips should be inspected and properly secured before the ATV is operated.

Why Replace Both Handlebar Grips Together?

Replacing both grips at the same time can help maintain a consistent feel on the left and right sides of the handlebar.

It also restores a matching appearance, particularly when the original grips have faded or become unevenly worn.

When both grips show significant wear, a complete set provides a convenient replacement option.

Part number 112951 is offered as a grip set for this purpose.

Handlebar Grips vs. Throttle and Brake Controls

The TAO MOTORS RAPTOR 125 handlebar assembly includes several separate components.

  • 112951 – Handlebar Grip Set: Left and right hand-gripping surfaces.
  • Handlebar: The structural component supporting the grips and controls.
  • Throttle Control: The mechanism used to control engine acceleration.
  • Brake Lever: A control used to operate the corresponding braking system.
  • Handlebar Switches: Electrical controls installed on compatible vehicle versions.

These components perform different functions and are not interchangeable.

This product includes the handlebar grips only. The handlebar, throttle mechanism, brake levers, cables and electrical switches are not included.

Handlebar Grip Replacement and Installation

Before installation, compare the new grip set directly with the original components.

Verify the mounting dimensions and confirm the correct left and right configurations.

Remove the worn grips carefully without damaging the handlebar or surrounding controls.

Clean the mounting surfaces before fitting the replacements.

Inspect the handlebar and the throttle control mechanism for damage or abnormal wear.

Install the grips using an appropriate method recommended for their design.

After installation, ensure the grips are securely fitted and do not rotate unintentionally.

Pay special attention to the right-hand throttle assembly.

Make sure the throttle operates smoothly and returns freely to its resting position.

Verify that the brake levers and other handlebar controls remain accessible and operate without interference.

Never operate the ATV with a loose handlebar grip or a throttle control that sticks or fails to return properly.

Compatibility with Other TAO MOTORS ATVs

Part number 112951 appears in several TAO MOTORS replacement parts catalogs.

It is also listed for certain NEW T-FORCE, NEW CHEETAH and MUDHAWK ATV configurations.

However, handlebar and throttle control designs may vary between different models and production versions.

Before ordering for another ATV, confirm the handlebar dimensions and original grip configuration.

Do not assume that all ATV grips are interchangeable simply because they look similar.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 112951
  • Manufacturer description: Hand Grip Set
  • Application: Handlebar and steering system
  • Positions: Left and right
  • Category: Handlebar and steering

Always confirm the original handlebar grip dimensions and throttle arrangement before installation.

Technical Specifications

  • OEM part number: 112951
  • Previous EcoBike description reference: 11295
  • Part name: Handlebar Grip Set
  • Alternate name: ATV Hand Grip Set
  • Component type: Handlebar grips
  • Application: Handlebar and steering
  • Mounting positions: Left and right
  • Packaging: Sold as a set
  • Contents: 2 handlebar grips
  • Mounting dimensions: Verify against original grips
  • Exact material: Confirm on stocked product
  • Quality: Genuine OEM replacement part
  • Vehicle: Compatible TAO MOTORS RAPTOR 125cc ATV
  • Category: Handlebar and steering
  • Handlebar: Not included
  • Throttle control: Not included
  • Brake levers and cables: Not included

Frequently Asked Questions

What is the purpose of the 112951 handlebar grip set?

It replaces the hand-gripping surfaces located at the left and right ends of the ATV handlebars.

Is this grip set compatible with the RAPTOR 125 ATV?

EcoBike lists part number 112951 in its TAO MOTORS RAPTOR 125 handlebar and steering parts category. Confirm the original handlebar configuration before installation.

How many handlebar grips are included?

One set includes two grips: one for the left side and one for the right side.

Are the grips sold individually?

No. This listing is for a complete left-and-right grip set.

Is the throttle control included?

No. The handlebar grips and throttle control mechanism are separate components.

Is the handlebar included?

No. This product includes the replacement grips only.

When should I replace my handlebar grips?

Replace grips that are cracked, torn, excessively worn, loose or otherwise damaged.

Will these grips fit other TAO MOTORS ATVs?

Part number 112951 is also listed for certain NEW T-FORCE, NEW CHEETAH and MUDHAWK models. Verify fitment before ordering.

Is the correct part number 11295 or 112951?

EcoBike's existing product description displays 11295, but the product reference is 112951. Other replacement parts catalogs also identify the grip set as part number 112951.

Is this a genuine OEM replacement part?

Yes. This listing is for a genuine OEM TAO MOTORS replacement handlebar grip set.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts catalog includes handlebar grips, handlebars, throttle controls, cables, brake levers, switches, mounting brackets and other steering components.

Benefit from our replacement parts selection, customer service and experience with recreational vehicle maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

112951-Hand Grip Set

Specific References