33 Cross Large Flat Head...
  • 33 Cross Large Flat Head...

33 Cross Large Flat Head Bolt for TAO MOTORS RAPTOR ATV

$1.99
Il n'y a pas encore d'avis.
600680 – Genuine OEM M6x20 Cross Large Flat Head Bolt for TAO MOTORS RAPTOR 125 ATV

Genuine TAO MOTORS OEM cross large flat head bolt, part number 600680, for compatible RAPTOR 125 ATV mounting assemblies.

Featuring an M6 metric thread and 20 mm length, this bolt replaces a worn, damaged, or missing original fastener.

Its wide head provides a suitable bearing surface, while the cross-shaped drive allows installation with a matching tool.

Genuine OEM replacement part. Sold individually: one bolt only.

Available at EcoBike Canada.

 

Security garantes

 

Quick delivery

600680 – Genuine OEM M6x20 Cross Large Flat Head Bolt for TAO MOTORS RAPTOR 125 ATV

The TAO MOTORS cross large flat head bolt, OEM part number 600680, is a genuine replacement fastener intended for mechanical assemblies requiring this original equipment reference.

Listed by the manufacturer as Cross Large Flat Head Bolt M6x20, this component features a nominal M6 thread diameter, a 20 mm length, and a wide flat-profile head with a cross-shaped drive recess.

Its enlarged head provides a suitable bearing surface for compatible mounting applications and helps distribute clamping pressure across the contact area.

Replacing a worn, damaged, corroded, or missing bolt with the correct OEM fastener helps maintain the manufacturer's intended mounting configuration.

Why Choose This Genuine TAO MOTORS OEM Bolt?

  • Genuine TAO MOTORS / TAOTAO OEM replacement part.
  • Manufacturer part number: 600680.
  • Nominal metric thread diameter: M6.
  • Nominal length: 20 mm.
  • Wide, flat-profile head.
  • Cross-shaped drive recess.
  • Enlarged bearing surface.
  • Designed for compatible mechanical assemblies.
  • Replaces a damaged, worn, or missing fastener.
  • Helps preserve original equipment fastening specifications.
  • Ideal for ATV maintenance and repairs.
  • Sold individually: one bolt only.

Technical Specifications

  • Brand: TAO MOTORS / TAOTAO
  • OEM part number: 600680
  • Part type: Cross large flat head bolt
  • Manufacturer designation: Cross Large Flat Head Bolt M6x20
  • Nominal thread diameter: M6 (6 mm)
  • Nominal bolt length: 20 mm
  • Thread type: Metric
  • Thread pitch: Verify against original fastener
  • Head configuration: Wide, flat-profile head
  • Drive type: Cross-shaped recess
  • Countersunk head: Not confirmed
  • Exact material: Not specified
  • Function: Mechanical fastening and component retention
  • Category: Mechanical fasteners
  • Quality: Genuine OEM replacement part
  • Compatibility: TAO MOTORS RAPTOR 125 ATV requiring part 600680
  • Package quantity: 1 bolt

What Is a Cross Large Flat Head Bolt Used For?

A cross large flat head bolt is a mechanical fastener designed to secure components using a compatible threaded mounting point or nut.

The wide head offers an enlarged contact surface for mounting assemblies that require this particular style of fastener.

Its cross-shaped drive recess allows installation and removal using a matching screwdriver bit.

Correct thread size, bolt length, head configuration, and tightening specifications are important for proper assembly.

Difference Between Parts 600680 and 110552

Both references are listed by TAO MOTORS as cross large flat head bolts, but they have different lengths.

  • 600680: M6x20 cross large flat head bolt.
  • 110552: M6x30 cross large flat head bolt.

These fasteners should not automatically be considered interchangeable.

An incorrect bolt length may interfere with surrounding components or prevent proper tightening.

When Should You Replace This Bolt?

Inspect the original fastener if you notice:

  • A missing bolt.
  • A worn or rounded cross-shaped drive recess.
  • Stripped or damaged threads.
  • A cracked or deformed bolt head.
  • Significant corrosion.
  • A bent bolt shaft.
  • A fastener that cannot be tightened correctly.
  • Damage following an impact or mechanical disassembly.

Inspect the corresponding mounting threads, nuts, and washers for damage before installing a replacement bolt.

Installation and Maintenance

Before performing mechanical work, shut off the engine, remove the ignition key, and securely park the ATV.

Compare the replacement bolt with the original fastener, including its M6 thread diameter, 20 mm length, thread pitch, and head design.

Use a properly sized cross-head driver bit to avoid damaging the drive recess during installation.

Follow the manufacturer's installation procedure and apply the specified tightening torque for the assembly.

Do not substitute a countersunk bolt, Allen bolt, or external hex-head bolt without confirming compatibility.

TAO MOTORS RAPTOR 125 ATV Compatibility

OEM part number 600680 is documented in TAO MOTORS parts catalogs among engine and fuel supply system fasteners used on compatible ATVs.

This listing is intended for RAPTOR 125 configurations requiring the same OEM reference. Verify the original mounting position using your vehicle's parts diagram.

Before ordering, confirm:

  • Original OEM part number: 600680.
  • Nominal M6 thread diameter.
  • 20 mm bolt length.
  • Correct thread pitch.
  • Wide flat head with cross-shaped drive.
  • Original mounting location.

Important: Sold individually. Each quantity ordered includes one M6x20 cross large flat head bolt only.

Nuts, washers, and other mounting hardware are sold separately.

Why Buy from EcoBike Canada?

EcoBike Canada specializes in ATVs, dirt bikes, and genuine TAO MOTORS OEM replacement parts.

We supply original cross-head bolts, Allen bolts, nuts, washers, and other mechanical components to help owners maintain and repair their RAPTOR 125 ATVs.

Use the original OEM reference number to identify the correct replacement fastener for your vehicle.

Frequently Asked Questions

Is this a genuine OEM replacement bolt?
Yes. It is offered as a genuine TAO MOTORS OEM replacement part, number 600680.

What are its dimensions?
The nominal dimensions are M6x20 mm.

What type of head does it have?
It features a wide, flat-profile head with a cross-shaped drive recess.

Is this a countersunk bolt?
The manufacturer does not specifically confirm a countersunk head. Compare the physical part with the original.

How is it different from part 110552?
Part 600680 measures M6x20, while part 110552 measures M6x30.

Does it fit the RAPTOR 125 ATV?
It is intended for compatible configurations requiring OEM part number 600680. Confirm the original mounting position.

Is this bolt sold individually?
Yes. The price includes one bolt only.

Are nuts and washers included?
No. This listing includes the bolt only.

600680-Flat Head Bolt

Specific References