36 Hex Flange Bolt for TAO...
  • 36 Hex Flange Bolt for TAO...

36 Hex Flange Bolt for TAO MOTORS RAPTOR ATV

$1.99
Il n'y a pas encore d'avis.
105141 – Genuine OEM M6x20 Hex Flange Bolt for TAO MOTORS RAPTOR 125 ATV

Genuine TAO MOTORS OEM hex flange bolt, part number 105141, for compatible RAPTOR 125 ATV mounting assemblies.

Featuring an M6 metric thread and 20 mm length, this bolt replaces a worn, damaged, or missing original fastener.

Its external hexagonal head and integrated flange provide an enlarged bearing surface for compatible mechanical connections.

Genuine OEM replacement part. Sold individually: one bolt only.

Available at EcoBike Canada.

 

Security garantes

 

Quick delivery

105141 – Genuine OEM M6x20 Hex Flange Bolt for TAO MOTORS RAPTOR 125 ATV

The TAO MOTORS hex flange bolt, OEM part number 105141, is a genuine replacement fastener designed for compatible ATV mechanical assemblies requiring this original equipment reference.

Listed by the manufacturer as Hex Flange Bolt M6x20, this component features a nominal M6 metric thread diameter, a 20 mm length, and an external hexagonal head with an integrated flange.

The built-in flange provides an enlarged bearing surface beneath the bolt head, helping distribute clamping pressure across compatible mounting surfaces.

Part number 105141 is documented in several TAO MOTORS parts catalogs, including engine, fuel system, and mechanical mounting assemblies.

Replacing a worn, damaged, bent, corroded, or missing fastener with the correct OEM bolt helps maintain the manufacturer's intended mounting configuration.

Why Choose This Genuine TAO MOTORS OEM Hex Flange Bolt?

  • Genuine TAO MOTORS / TAOTAO OEM replacement part.
  • Manufacturer part number: 105141.
  • Nominal metric thread diameter: M6.
  • Nominal length: 20 mm.
  • External hexagonal bolt head.
  • Integrated flange beneath the head.
  • Enlarged bearing surface.
  • Helps distribute clamping force across compatible mounting surfaces.
  • Designed for assemblies requiring this specific OEM reference.
  • Replaces a damaged, worn, or missing fastener.
  • Helps preserve original equipment fastening characteristics.
  • Ideal for ATV maintenance and mechanical repairs.
  • Sold individually: one bolt only.

Technical Specifications

  • Brand: TAO MOTORS / TAOTAO
  • OEM part number: 105141
  • Part type: Hex flange bolt
  • Manufacturer designation: Hex Flange Bolt M6x20
  • Nominal thread diameter: M6 (6 mm)
  • Nominal bolt length: 20 mm
  • Thread type: Metric
  • Thread pitch: Verify against the original fastener
  • Head type: External hexagonal head
  • Flange: Integrated beneath the bolt head
  • Allen socket: No
  • Cross-head drive: No
  • Exact material: Not confirmed
  • Strength grade: Not specified
  • Function: Mechanical fastening and component retention
  • System: ATV mechanical mounting assemblies
  • Quality: Genuine OEM replacement part
  • Compatibility: TAO MOTORS RAPTOR 125 ATV configurations requiring part 105141
  • Package quantity: 1 hex flange bolt

What Is a Hex Flange Bolt Used For?

A hex flange bolt is a threaded mechanical fastener featuring an external six-sided head and an integrated bearing flange.

The flange provides additional contact area underneath the head, helping distribute the tightening force over a larger surface.

This configuration is used in mechanical assemblies where the original equipment manufacturer specifies a flange-head fastener.

The external hexagonal head allows installation and removal with a correctly sized wrench or socket.

The correct thread diameter, bolt length, head configuration, and tightening specifications must be maintained for proper installation.

Hex Flange Bolt vs. Standard Hex Bolt

A conventional hex bolt features a six-sided external head for tightening with a wrench or socket.

A hex flange bolt also features a six-sided head but includes an enlarged bearing flange beneath it.

The flange performs a function similar to an integrated washer surface.

However, a flange bolt should not automatically replace a standard bolt or a bolt-and-washer assembly without confirming the manufacturer's mounting requirements.

Difference Between OEM Parts 105141 and 600680

TAO MOTORS lists both part numbers as M6x20 fasteners, but their head designs are different.

  • 105141: M6x20 hex flange bolt with an external hexagonal head and integrated flange.
  • 600680: M6x20 cross large flat head bolt featuring a cross-shaped drive recess.

Although the nominal diameter and length are the same, these fasteners are not necessarily interchangeable.

Head geometry, bearing surface, and mounting clearance must match the original assembly.

When Should You Replace a Hex Flange Bolt?

Inspect the original fastener if you notice:

  • A missing bolt.
  • Rounded or damaged external hexagonal faces.
  • Stripped or damaged threads.
  • A cracked or distorted flange.
  • A bent bolt shaft.
  • Significant corrosion.
  • A fastener that cannot be tightened correctly.
  • Damage following an impact or mechanical disassembly.

Inspect the mounting bracket, nut, and mating threads for damage before installing a replacement fastener.

Installation and Maintenance

Before performing maintenance, turn off the engine, remove the ignition key, and securely park the ATV.

Compare the replacement bolt with the original component, verifying:

  • OEM part number 105141.
  • Nominal M6 thread diameter.
  • 20 mm bolt length.
  • Correct thread pitch.
  • External hexagonal head.
  • Integrated flange configuration.
  • Required wrench or socket size.
  • Original mounting position.

Inspect the mounting surfaces and mating threads before installation.

Use a correctly sized wrench or socket to tighten the bolt without damaging its head.

Follow the manufacturer's installation procedure and apply the specified tightening torque for the assembly.

Do not force incompatible threads or substitute a different bolt type without confirming the original mounting requirements.

TAO MOTORS RAPTOR 125 ATV Compatibility

OEM part number 105141 is documented in TAO MOTORS parts catalogs under the designation Hex Flange Bolt M6x20.

The reference is listed for multiple compatible TAO MOTORS vehicle configurations, including certain T-FORCE, CHEETAH, MUDHAWK, ROCK, and D125 applications.

This product listing is intended for RAPTOR 125 ATV configurations requiring the same OEM fastener. Exact mounting compatibility should be verified against the original vehicle parts diagram.

Before purchasing, confirm:

  • Original OEM reference: 105141.
  • Nominal M6 thread diameter.
  • 20 mm bolt length.
  • Correct thread pitch.
  • External hexagonal head with integrated flange.
  • Original mounting location.

Important: Sold individually. Each quantity ordered includes one M6x20 hex flange bolt only.

Nuts, separate washers, and additional mounting hardware are sold separately.

Why Buy from EcoBike Canada?

EcoBike Canada specializes in ATVs, dirt bikes, and genuine TAO MOTORS OEM replacement parts.

We supply original hex flange bolts, Allen bolts, cross-head screws, nuts, washers, and other mechanical components for maintaining and repairing compatible RAPTOR 125 ATVs.

Our parts catalog allows customers to identify replacement hardware by the original manufacturer reference number.

Frequently Asked Questions

Is this a genuine OEM replacement bolt?
Yes. It is offered as a genuine TAO MOTORS OEM replacement part, number 105141.

What are the bolt dimensions?
The nominal dimensions are M6x20 mm.

What type of head does it have?
It features an external hexagonal head with an integrated flange.

What is the purpose of the flange?
The flange provides an enlarged bearing surface beneath the bolt head.

Does this bolt require an Allen key?
No. It uses an external hexagonal head and is tightened with an appropriate wrench or socket.

Is this the same as part number 600680?
No. Part number 600680 is a cross large flat head bolt, while part 105141 is a hex flange bolt.

Does this fit the TAO MOTORS RAPTOR 125?
It is intended for compatible RAPTOR 125 configurations requiring OEM part number 105141. Verify the original mounting assembly.

Is this bolt sold individually?
Yes. The price includes one hex flange bolt only.

Are mounting nuts and washers included?
No. This product listing includes the bolt only.

105141-Flange Bolt

Specific References