2 Handlebar TAO MOTORS...
  • 2 Handlebar TAO MOTORS...
  • 2 Handlebar TAO MOTORS...

2 Handlebar TAO MOTORS RAPTOR 125 ATV

$49.99
Il n'y a pas encore d'avis.
603876 Handlebar for TAO MOTORS RAPTOR 125 ATV

Genuine OEM replacement handlebar designed for the TAO MOTORS RAPTOR 125cc ATV.

Essential steering component that allows the rider to control front wheel direction.

Designed to accommodate compatible handlebar grips, throttle controls, brake levers and switches.

Ideal for replacing a bent, cracked, damaged or deformed original handlebar.

Manufacturer part number: 603876 – Handle Bar.

Sold individually – One handlebar included.

Grips, controls, clamps and mounting hardware sold separately.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

Genuine Handlebar for TAO MOTORS RAPTOR 125 ATV

The 603876 Handlebar is a genuine OEM TAO MOTORS replacement part designed for compatible steering assemblies on the RAPTOR 125cc ATV.

Identified in the manufacturer's parts catalog as Handle Bar ATA125-K, this component replaces the original handlebar used on the ATV.

The handlebar is one of the main components that allows the rider to control vehicle direction.

Mounted to the steering assembly, it transfers the rider's steering movements to the corresponding steering mechanism.

It also provides mounting locations for compatible hand grips, throttle controls, brake levers and electrical switches.

A properly installed and undamaged handlebar is important for maintaining comfortable hand positioning and predictable steering operation.

Part number 603876 appears at diagram position 2 in the TAO MOTORS ATA125-K steering system parts catalog.

This genuine OEM replacement is ideal for repairing an ATV with a bent, cracked, damaged or deformed original handlebar.

IMPORTANT: This handlebar is sold individually. One handlebar is included per quantity ordered. Handlebar grips, controls, mounting clamps and fastening hardware are separate components.

Why Choose the Genuine OEM 603876 Handlebar?

  • Genuine OEM TAO MOTORS replacement part.
  • Original manufacturer part number: 603876.
  • Designed for compatible RAPTOR 125cc ATV steering assemblies.
  • Manufacturer designation: Handle Bar ATA125-K.
  • Listed at position 2 in the steering system diagram.
  • Replaces a bent or damaged original handlebar.
  • Allows the rider to control steering direction.
  • Designed to accommodate compatible handlebar controls.
  • Helps restore the original steering configuration.
  • Suitable for ATV repairs following a fall or impact.
  • Useful during steering system maintenance.
  • Sold individually.

An Essential Component for ATV Steering Control

The handlebar is the primary steering control used by the rider of a TAO MOTORS RAPTOR 125 ATV.

When the rider turns the handlebar, this movement is transferred through the steering system to the front wheel assemblies.

The handlebar must remain securely mounted and correctly positioned to provide consistent steering control.

During recreational ATV operation, the rider uses the handlebar to maneuver around obstacles and control the vehicle over uneven terrain.

A bent or improperly mounted handlebar can affect hand positioning, rider comfort and steering response.

Replacing a damaged handlebar with the correct genuine OEM part helps restore the intended factory mounting configuration.

Designed for the RAPTOR 125 Steering System

The TAO MOTORS RAPTOR 125 steering system includes several mechanical components that work together to control the front wheels.

The ATA125-K parts catalog identifies the handlebar, handlebar clamps, steering shaft, grips and corresponding control assemblies as separate components.

The 603876 Handlebar is the main horizontal steering component held by the rider.

It is installed on the corresponding handlebar mounting brackets and connected mechanically to the steering system.

The original configuration must be maintained to ensure appropriate positioning and operation.

Always verify the mounting dimensions and original steering configuration before substituting another handlebar.

Handlebar Only – Controls and Mounting Parts Sold Separately

Part number 603876 identifies the handlebar itself, not a complete handlebar assembly with all accessories.

The TAO MOTORS parts catalog lists several related components separately:

  • 603876 – Handlebar: Main steering handlebar component.
  • 112951 – Hand Grip Set: Left and right handlebar grips.
  • 101676 – Handlebar Clamp: Mounting component used to secure the handlebar.
  • 105231 – Hex Flange Bolt: M8 x 50 mm mounting fastener listed in the corresponding assembly.
  • 109414 – Brake/Throttle Control Assembly: Corresponding brake and throttle control components.
  • 116309 – Left Handlebar Switch: Electrical switch assembly.
  • 603839 – Steering Shaft: Separate steering column component located below the handlebar.

These components have different functions and should not be confused with the handlebar itself.

This product includes one handlebar only. Grips, brake levers, throttle controls, switches, clamps, cables and mounting bolts are not included.

Handlebar vs. Steering Shaft

The handlebar and steering shaft are two different components of the ATV steering system.

The 603876 Handlebar is the component held by the rider and used to operate the steering.

The 603839 Steering Shaft is a separate mechanical component that helps transfer steering movement to the corresponding front steering assembly.

The handlebar must be correctly secured to its mounting brackets so that steering input is transmitted properly.

If excessive play or abnormal steering movement is present, the handlebar, clamps, steering shaft and related hardware should be inspected.

Ideal for Replacing a Bent or Damaged Handlebar

ATV handlebars are exposed to vibration, steering forces and occasional impacts during recreational riding.

A fall, rollover or collision can bend or damage the handlebar and its mounting components.

Some damage may be immediately visible, while other problems may only become apparent after inspection.

A deformed handlebar can change the positioning of the grips and controls, making steering uncomfortable or difficult.

Replacing a damaged handlebar with the correct genuine OEM component helps restore the intended steering arrangement.

When Should an ATV Handlebar Be Replaced?

Handlebar replacement may be necessary when the original component shows:

  • Visible bending or deformation.
  • Cracks or structural damage.
  • Damaged handlebar ends.
  • Deformation around the mounting area.
  • Incorrect handlebar alignment after checking the clamps.
  • Abnormal positioning of grips and controls.
  • Damage following a rollover or fall.
  • Corrosion that compromises structural integrity.
  • Damage preventing proper installation of original controls.

A handlebar that appears crooked is not necessarily bent. The mounting clamps or steering shaft may also be misaligned or damaged.

Inspect the entire steering assembly before determining which parts need replacement.

A cracked or structurally damaged handlebar should not be reused without a proper safety assessment.

Check Handlebar Dimensions and Mounting Compatibility

ATV handlebars are available in different shapes, widths and mounting configurations.

Before ordering part number 603876, compare the replacement with the original handlebar installed on the vehicle.

Important fitment characteristics include:

  • Overall handlebar width.
  • Tube diameter at the mounting clamps.
  • Tube diameter at the grip positions.
  • Handlebar height and bend profile.
  • Spacing of the mounting areas.
  • Throttle and brake control positioning.
  • Clearance for cables and electrical wiring.

The exact dimensions of part number 603876 are not specified in the parts catalog reviewed.

Confirm the original OEM reference and mounting configuration before installation.

Handlebar Replacement and Installation

Before installation, ensure that the new handlebar matches the original mounting arrangement.

Inspect the handlebar clamps, mounting bolts, steering shaft and surrounding components for damage.

Carefully remove the original handlebar grips and controls as required.

Remove the damaged handlebar without pulling or damaging the throttle cable, brake cables or electrical wiring.

Position the replacement handlebar in the appropriate mounting clamps.

Check alignment and tighten the mounting hardware according to the manufacturer's specified procedure and torque requirements.

Reinstall the compatible handlebar grips, throttle control, brake levers and electrical switches.

Make sure all components are firmly secured and correctly positioned.

After installation, turn the handlebar fully left and right to verify free steering movement without cable tension, binding or interference.

Important Safety Checks After Installation

The handlebar directly affects the rider's ability to steer the ATV.

After replacement, several important checks should be completed before operating the vehicle.

  • Verify handlebar clamp tightness.
  • Confirm proper handlebar alignment.
  • Ensure that both grips are securely installed.
  • Check that the throttle returns freely to its resting position.
  • Verify normal brake lever operation.
  • Make sure electrical wiring is not pinched.
  • Check cable routing at both steering limits.
  • Confirm that the handlebar does not contact surrounding body panels abnormally.

If the steering system binds, has excessive play or fails to operate correctly, do not use the ATV until the problem has been repaired.

Professional installation is recommended because the handlebar is an important steering safety component.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 603876
  • Manufacturer description: Handle Bar ATA125-K
  • Application: Steering system
  • Location: Upper steering assembly
  • Category: Handlebar and steering

Part number 603876 also appears in certain related ATV parts catalogs using compatible handlebar configurations.

Fitment on another vehicle should always be confirmed using the original part number and mounting specifications.

Technical Specifications

  • Part number: 603876
  • Part name: Handlebar
  • Alternate name: ATV Steering Handlebar
  • Manufacturer designation: Handle Bar ATA125-K
  • Component type: Steering handlebar
  • Parts catalog: ATA125-K
  • Diagram position: 2
  • Quantity per vehicle: 1
  • Mounting location: Upper steering assembly
  • Function: Manual steering control
  • Exact material: Verify stocked component
  • Color and finish: Verify stocked component
  • Overall width: Verify actual part
  • Tube diameter: Verify actual part
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Packaging: Sold individually
  • Quantity included: 1 handlebar
  • Handlebar grips: Not included
  • Clamps and mounting bolts: Not included
  • Brake levers, cables and controls: Not included

Frequently Asked Questions

What is the purpose of the 603876 handlebar?

It allows the rider to control ATV steering and provides mounting locations for the compatible handlebar grips and controls.

Is part number 603876 compatible with the RAPTOR 125 ATV?

Yes. Part number 603876 appears at position 2 in the TAO MOTORS ATA125-K steering system parts catalog.

Is this a complete handlebar assembly with grips?

No. This listing is for the handlebar only. Grips and control components are separate replacement parts.

Are the left and right grips included?

No. The original hand grip set is listed separately under part number 112951.

Are handlebar clamps included?

No. The handlebar clamps are separate components, including part number 101676 in the corresponding parts catalog.

Is the throttle control included?

No. The throttle control, cables and other handlebar controls are sold separately.

What is the difference between 603876 and 603839?

Part number 603876 identifies the handlebar, while 603839 identifies the steering shaft. These are different components of the steering system.

When should I replace my ATV handlebar?

A bent, cracked, deformed or structurally damaged handlebar should be inspected and replaced when its condition affects safe steering operation.

Can I install a universal ATV handlebar instead?

A universal handlebar must have compatible dimensions, mounting areas, bend geometry and control clearances. OEM part number 603876 identifies the handlebar used for the original corresponding assembly.

Is this a genuine OEM replacement part?

Yes. This product is a genuine OEM TAO MOTORS replacement handlebar identified by part number 603876.

Is the handlebar sold individually?

Yes. One handlebar is included per quantity ordered. Grips, clamps, controls and mounting hardware are not included.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts catalog includes handlebars, grips, mounting clamps, steering shafts, throttle controls, brake levers, cables, switches and other steering components.

Benefit from our replacement parts selection, customer service and experience with recreational vehicle assembly, maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

603876-Handle Bar

Specific References