28 Cross Large Flat Head...
  • 28 Cross Large Flat Head...

28 Cross Large Flat Head Bolt for TAO MOTORS RAPTOR ATV

$1.99
Il n'y a pas encore d'avis.
110552 – Genuine OEM M6 x 30 mm Cross Large Flat Head Bolt for TAO MOTORS RAPTOR 125 ATV

Genuine TAO MOTORS OEM M6 x 30 mm cross large flat head bolt designed to replace a worn, damaged, or missing mechanical fastener on your RAPTOR 125 ATV.

This original replacement bolt features a wide, low-profile head with a cross-shaped drive recess for installation using a compatible screwdriver bit.

The enlarged head provides a wider bearing surface for compatible mechanical mounting applications.

Ideal for maintaining and repairing ATV engine-related assemblies and other mounting points requiring this original equipment reference.

OEM part number: 110552. Size: M6 x 30 mm.

Sold individually.

Available at EcoBike Canada, your source for genuine TAO MOTORS ATV replacement parts.

 

Security garantes

 

Quick delivery

110552 – Genuine OEM M6 x 30 mm Cross Large Flat Head Bolt for TAO MOTORS RAPTOR 125 ATV

The TAO MOTORS cross large flat head bolt, OEM part number 110552, is a genuine replacement fastener intended for compatible RAPTOR 125 ATV mechanical assemblies.

Listed by the manufacturer as Cross Large Flat Head Bolt M6 x 30, this component features a nominal M6 thread diameter, a 30 mm length, and a wide, relatively flat head with a cross-shaped drive recess.

Its enlarged head provides a wider bearing surface for mechanical connections designed to use this particular style of fastener.

Part number 110552 appears in the engine and fuel system parts diagrams of compatible TAO MOTORS ATVs. The exact mounting location should be confirmed using the original vehicle parts diagram.

Replacing a worn, bent, corroded, or damaged fastener with the correct genuine OEM part helps preserve the original equipment mounting configuration.

Why Choose This Genuine TAO MOTORS OEM Bolt?

  • Genuine TAO MOTORS / TAOTAO OEM replacement part.
  • Manufacturer part number: 110552.
  • Nominal metric thread diameter: M6.
  • Nominal bolt length: 30 mm.
  • Wide, flat-profile bolt head.
  • Cross-shaped drive recess.
  • Enlarged bearing surface for compatible assemblies.
  • Designed for mechanical mounting applications requiring this reference.
  • Replaces a worn, damaged, or missing original fastener.
  • Helps maintain original equipment fastening characteristics.
  • Listed for compatible TAO MOTORS RAPTOR ATVs.
  • Ideal for ATV maintenance and mechanical repairs.
  • Sold individually: one bolt only.

Technical Specifications

  • Brand: TAO MOTORS / TAOTAO
  • OEM part number: 110552
  • Part type: Cross large flat head bolt
  • Manufacturer designation: Cross Large Flat Head Bolt M6 x 30
  • Nominal thread diameter: M6 (6 mm)
  • Nominal bolt length: 30 mm
  • Thread type: Metric
  • Thread pitch: Verify against the original fastener
  • Head configuration: Wide, flat-profile head
  • Drive type: Cross-shaped recess
  • Countersunk head configuration: Not confirmed
  • Exact material: Not specified
  • Function: Mechanical fastening and component retention
  • Catalog system: Engine and fuel supply assembly
  • Exact mounting location: Refer to the original vehicle parts diagram
  • Quality: Genuine OEM replacement part
  • Compatibility: TAO MOTORS RAPTOR 125 ATV requiring part 110552
  • Package quantity: 1 bolt

What Is a Cross Large Flat Head Bolt Used For?

A cross large flat head bolt is a threaded mechanical fastener designed to secure components in assemblies that require this particular head style.

The enlarged head provides a wider contact surface compared with some narrower bolt head designs of the same nominal thread diameter.

The cross-shaped drive recess allows installation and removal with a compatible screwdriver bit.

This fastener is intended for applications where the original equipment manufacturer specifies its dimensions and head configuration.

A standard hex bolt, flange bolt, or countersunk screw should not automatically be considered an interchangeable replacement.

Flat Head vs. Countersunk Head vs. Hex Head

Mechanical fasteners are manufactured with different head configurations to suit specific mounting requirements.

  • Wide flat-profile head: Provides a relatively low-profile head and a wider bearing surface.
  • Countersunk head: Generally features a tapered underside designed to fit a matching countersunk opening.
  • Hexagonal head: Has six external faces for tightening with a wrench or socket.
  • Cross-shaped drive: Features a cross recess for installation using a matching driver bit.

Part number 110552 is identified as a Cross Large Flat Head Bolt. The exact physical head geometry should be compared with the original fastener before installation.

Why Use the Correct Original Equipment Bolt?

Proper fastener compatibility depends on more than thread diameter and length.

Head shape, thread pitch, bearing surface, and original mounting requirements are also important.

Using an incorrect bolt may interfere with surrounding components, create improper contact pressure, or prevent correct tightening.

Choosing OEM reference 110552 allows the replacement to be matched to the original parts catalog where this reference is specified.

When Should You Replace a Cross Flat Head Bolt?

Inspect the fastener and related mounting components if you notice:

  • A missing bolt.
  • A worn or rounded cross-shaped drive recess.
  • Stripped or damaged threads.
  • A cracked or deformed bolt head.
  • Significant corrosion.
  • A bent bolt shaft.
  • A fastener that cannot be tightened correctly.
  • Damage following an impact or mechanical disassembly.

A bolt with damaged threads or a severely worn drive recess should be replaced with an appropriate original equipment fastener.

Installation and Maintenance

Before performing mechanical work, turn off the engine, remove the ignition key, and properly secure the ATV.

Compare the replacement bolt with the original component, verifying:

  • OEM part number 110552.
  • Nominal M6 thread diameter.
  • 30 mm length.
  • Correct thread pitch.
  • Wide, flat-profile head.
  • Cross-shaped drive configuration.
  • Original mounting position.

Use a driver bit that matches the cross-shaped recess to reduce the risk of damaging the bolt head during installation.

Inspect the mounting threads and contact surfaces before installing the replacement fastener.

Follow the manufacturer's service procedure and apply the specified tightening torque for the assembly.

Do not substitute a different bolt length, thread configuration, or head style without confirming compatibility.

TAO MOTORS RAPTOR 125 ATV Compatibility

OEM part number 110552 is listed for RAPTOR applications in TAO MOTORS parts catalogs under the designation Cross Large Flat Head Bolt M6 x 30.

The reference appears in engine and fuel supply assembly parts lists for compatible vehicles.

Before purchasing, verify:

  • Original OEM reference: 110552.
  • Nominal M6 thread diameter.
  • Nominal 30 mm length.
  • Correct thread pitch.
  • Wide flat head configuration.
  • Cross-shaped drive recess.
  • Mounting position on your specific RAPTOR 125 model.

Important: Sold separately, individually. Each quantity ordered includes one M6 x 30 mm cross large flat head bolt only.

Nuts, washers, and additional mounting hardware are sold separately.

Why Buy from EcoBike Canada?

EcoBike Canada specializes in ATVs, dirt bikes, and genuine TAO MOTORS OEM replacement parts.

We supply original cross-head bolts, screws, nuts, washers, brackets, and other mechanical components to help owners maintain and repair their RAPTOR 125 ATVs.

Our parts catalog allows customers to identify replacement components using the original manufacturer reference numbers.

Choose correctly identified genuine OEM fasteners to maintain the original equipment mounting configuration.

Frequently Asked Questions

Is this a genuine OEM replacement part?
Yes. This bolt is offered as a genuine TAO MOTORS OEM replacement part, number 110552.

What are the bolt dimensions?
The nominal dimensions are M6 x 30 mm.

What type of head does this bolt have?
The manufacturer specifies a wide, flat-profile head with a cross-shaped drive recess.

Is this a countersunk bolt?
The Cross Large Flat Head Bolt designation does not confirm a countersunk head. Compare the physical bolt with the original part.

What tool is required?
Use a screwdriver bit matching the type and size of the cross-shaped drive recess.

What is the thread pitch?
The exact thread pitch is not specified in the M6 x 30 designation. Verify it against the original fastener.

Does this fit the TAO MOTORS RAPTOR 125?
Yes, for compatible RAPTOR 125 configurations requiring OEM part number 110552.

Can a standard hex bolt replace this component?
Not without confirming compatibility. The head configuration and contact surface may differ.

Is this bolt sold individually?
Yes. The price includes one cross flat head bolt only.

Are nuts or washers included?
No. This listing includes the bolt only. Other fastening components are sold separately.

110552-Flat Head Bolt

Specific References