Genuine OEM cotter pin designed for compatible mechanical fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.
Features a 3 mm nominal diameter and 40 mm length for securing fasteners requiring a retaining pin.
Used in corresponding front suspension assemblies to help secure castle nuts installed on compatible drilled shafts.
Ideal for replacing a removed, bent, broken or missing original cotter pin.
Dimensions: 3 x 40 mm.
Sold individually – One cotter pin included.
Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.
Security garantes
Quick delivery
The 105340 Cotter Pin 3 x 40 mm is a genuine OEM TAO MOTORS replacement fastener intended for compatible mechanical assemblies on the RAPTOR 125cc ATV.
This split retaining pin features a 3 mm nominal diameter and a 40 mm length.
It is used in assemblies requiring mechanical retention, including certain front suspension fastenings that incorporate a castle nut and a compatible drilled shaft.
Once installed, its two ends are bent apart to help prevent the pin from slipping out of position.
This retaining method helps secure fastening components exposed to vibration and mechanical movement during ATV operation.
The 105340 cotter pin is ideal for replacing a removed, bent, broken or missing original retaining pin.
IMPORTANT: This product is sold individually. One 3 x 40 mm cotter pin is included per quantity ordered.
ATV front suspension systems contain mechanical connections that must remain securely fastened during vehicle operation.
Some of these assemblies use castle nuts and cotter pins to provide an additional mechanical retaining method.
The cotter pin passes through a hole in the threaded shaft or bolt, and its ends are bent to secure it in place.
This arrangement helps prevent the corresponding nut from rotating freely or becoming detached when the assembly is properly installed.
A missing or incorrectly installed cotter pin may compromise the security of the associated fastening assembly.
Part number 105340 features the following nominal specifications:
The diameter must match the retaining hole in the corresponding shaft or bolt.
The length must be appropriate for the intended assembly so that the pin can be secured correctly.
Using an incorrectly sized cotter pin may prevent proper installation or fastening retention.
The 105340 cotter pin appears in the ATA125-K family front suspension diagram near the 105326 M14 x 1.5 castle nut.
This type of assembly uses a castellated nut and a drilled shaft to create an additional retaining feature.
After following the manufacturer's tightening procedure, the cotter pin is inserted and its ends are bent to secure it.
Important: Part number 105340 measures 3 x 40 mm and must not be confused with part number 105338, which measures 2.5 x 30 mm.
Always verify the required cotter pin reference for the specific mounting location.
Cotter pins are retaining components that may become deformed during installation or removal.
Replacement is recommended in situations such as:
Using a new cotter pin of the correct dimensions is preferable to reinstalling a previously bent retaining pin.
Before installation, inspect the castle nut, mating threads and retaining hole for damage.
Confirm that the cotter pin dimensions match the manufacturer's requirements.
Tighten the nut according to the applicable specifications and follow the correct procedure for aligning its slots with the shaft hole.
Insert the cotter pin and bend its ends securely to prevent accidental removal.
Make sure the bent ends do not interfere with nearby moving components.
A cotter pin does not replace proper nut tightening or the manufacturer's fastening procedure.
The ATA125-K family parts catalog lists 2 cotter pins with part number 105340 in the complete front suspension assembly.
This quantity refers to the complete vehicle assembly and not the number of pins included in this product listing.
To replace one cotter pin, order a quantity of 1. To replace both corresponding pins, order a quantity of 2 after confirming the vehicle configuration.
Part number 105340 is also listed in other TAO MOTORS ATV catalogs and certain rear suspension assemblies.
Always compare the original part reference and dimensions before ordering for another vehicle or mounting location.
It helps secure compatible mechanical fasteners, including castle nuts installed on drilled shafts or bolts.
It features a nominal diameter of 3 mm and a length of 40 mm.
Part number 105340 is listed in the ATA125-K family front suspension system, near the front wheel spindle fastening components.
Part number 105340 measures 3 x 40 mm, while 105338 measures 2.5 x 30 mm. These pins should not be considered interchangeable.
Using a new cotter pin is recommended after removal, particularly in safety-critical suspension and steering assemblies.
No. This product includes the cotter pin only. Castle nuts and other fastening hardware are sold separately.
Yes. Part number 105340 identifies a genuine OEM TAO MOTORS replacement cotter pin.
Yes. Each quantity ordered includes one cotter pin. To purchase two pins, select a quantity of two.
At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.
Our parts selection includes cotter pins, castle nuts, bolts, washers, bushings, bearings, suspension arms and other mechanical fastening components.
Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.
www.eco-bike.ca