19 Lower Left A-Arm TAO...
  • 19 Lower Left A-Arm TAO...
  • 19 Lower Left A-Arm TAO...

19 Lower Left A-Arm TAO MOTORS RAPTOR 125 ATV

$64.99
Il n'y a pas encore d'avis.
603857 Lower Left A-Arm for TAO MOTORS RAPTOR 125 ATV

Genuine OEM lower left front suspension A-arm designed for the TAO MOTORS RAPTOR 125cc ATV.

This lower control arm helps guide front suspension movement and maintain the original front-end geometry.

Supplied with pre-installed suspension bushings, a ball joint with protective boot and a grease fitting.

Ideal for replacing a bent, cracked, worn or damaged original lower suspension arm.

Position: Front lower left.

Sold individually – One lower left A-arm, not a pair.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

Lower Left A-Arm for TAO MOTORS RAPTOR 125 ATV

The 603857 Lower Left A-Arm is a genuine OEM TAO MOTORS replacement part designed for the front suspension system of the RAPTOR 125cc ATV.

Also known as a lower left control arm or lower left suspension arm, this component is an important part of the ATV's front suspension assembly.

It helps guide suspension movement and maintain the intended positioning of the front wheel and associated steering components.

Part number 603857 is designed for the front lower left position only. It must not be confused with the upper A-arm or the lower right control arm.

The assembly is supplied with pre-installed suspension bushings, a ball joint with protective boot and a grease fitting, according to the EcoBike product specifications.

Ideal for replacing a bent, cracked, excessively worn or damaged original suspension arm.

IMPORTANT: This product is sold individually. One lower left A-arm is included per quantity ordered, not a left-and-right pair.

Why Choose the Genuine OEM 603857 Lower Left A-Arm?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 603857.
  • Designed for the RAPTOR 125cc ATV.
  • Front lower left suspension position.
  • Triangular A-arm control arm design.
  • Pre-installed suspension bushings.
  • Ball joint with protective dust boot.
  • Grease fitting included.
  • Overall length of 295 mm.
  • Helps guide front suspension movement.
  • Helps maintain the original suspension geometry.
  • Replaces damaged or bent factory control arms.
  • Sold individually.

An Essential Component of the Front Suspension

The TAO MOTORS RAPTOR 125 front suspension system includes upper and lower A-arms, shock absorbers, bushings, ball joints, mounting spacers and fastening hardware.

The lower left A-arm helps guide the movement of the front suspension as the wheel travels over uneven terrain.

It forms part of the mechanical connection between the suspension mounting points and the front wheel assembly.

When the suspension moves, the A-arm contributes to maintaining the intended position and geometry of the front-end components.

A bent or damaged control arm may affect suspension alignment, vehicle stability and steering response.

Replacing a defective arm with the correct genuine OEM component helps restore the original suspension configuration.

Pre-Installed Suspension Bushings

The 603857 Lower Left A-Arm is supplied with suspension bushings already installed.

These bushings form part of the control arm pivot assemblies and help guide suspension movement while reducing direct friction between the associated mechanical components.

Pre-installed bushings simplify replacement by eliminating the need to separately install the corresponding bushings before mounting the arm.

During repairs, inspect the mounting bolts, spacers, locknuts and surrounding suspension components for wear or damage.

Ball Joint, Protective Boot and Grease Fitting

The EcoBike product specifications identify a ball joint with a 10 mm stud, a protective boot and a grease fitting.

The ball joint allows the corresponding suspension and steering components to articulate as the front suspension moves.

The protective boot helps limit exposure of the ball joint to dust, moisture and other contaminants.

The grease fitting allows maintenance when lubrication is required by the manufacturer's service procedure.

Before installation, inspect the complete assembly and confirm that its configuration matches the original part.

Original Dimensions and Mounting Specifications

The 603857 lower left A-arm is listed by EcoBike with the following measurements:

  • Overall length: 295 mm.
  • Distance between arms near bushings: 96 mm.
  • Distance between small mounting bracket tabs: 23 mm.
  • Bushing inside diameter: 10 mm.
  • Ball joint stud diameter: 10 mm.
  • Mounting position: Front lower left.

These specifications are useful when comparing the replacement control arm with the component currently installed on the ATV.

Important: Similar-looking A-arms may have different mounting points, dimensions and suspension geometry.

Always compare the original part number and mounting configuration before ordering.

Lower Left A-Arm vs. Upper A-Arm

The RAPTOR 125 front suspension uses control arms installed in different positions.

Part number 603857 identifies the lower left A-arm.

Part number 603855 identifies the upper A-arm, which can be used on either upper side according to the original mounting configuration.

Upper and lower control arms are different components and are not interchangeable.

The lower left control arm must also be distinguished from the lower right A-arm, which uses a different configuration and part reference.

When Should a Lower A-Arm Be Replaced?

Front suspension control arms are exposed to mechanical loads and impacts during ATV operation.

Inspection or replacement may be necessary when the original arm shows:

  • Visible bending or deformation.
  • Cracks or structural damage.
  • Damaged mounting points.
  • Excessive play in the ball joint.
  • Worn or damaged suspension bushings.
  • Abnormal front wheel positioning.
  • Unusual movement in the suspension assembly.
  • Steering or alignment problems following an impact.

These symptoms may also result from other suspension or steering components. Inspect the complete front-end assembly before determining the required repairs.

Replacement and Installation

Before installation, compare the replacement A-arm directly with the original component to confirm the correct side, position and mounting points.

Inspect the frame brackets, shock absorber, mounting spacers, bolts, locknuts and associated steering components.

Check that the pre-installed bushings and ball joint are correctly positioned and free from damage.

Install the control arm following the manufacturer's service procedures and specified tightening requirements.

After reassembly, verify that the suspension moves freely without binding or excessive play.

Inspect front wheel alignment and steering operation before returning the vehicle to service.

Professional installation is recommended because this component directly affects suspension and steering performance.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 603857
  • Manufacturer description: Lower Left A-Arm
  • Position: Front lower suspension
  • Side: Left only
  • Category: Front end and suspension

This part number is also listed for certain other TAO MOTORS ATVs, including the REX 125, as well as some Rival Mudhawk 10 configurations.

Before ordering for another vehicle, verify the original part number, dimensions and mounting points.

Technical Specifications

  • Part number: 603857
  • Part name: Lower Left A-Arm
  • Alternate name: Lower Left Control Arm
  • Component type: Front suspension control arm
  • Position: Lower
  • Side: Left
  • Overall length: 295 mm
  • Distance between arms near bushings: 96 mm
  • Distance between small bracket tabs: 23 mm
  • Bushing inside diameter: 10 mm
  • Ball joint stud diameter: 10 mm
  • Suspension bushings: Pre-installed
  • Ball joint: With protective boot
  • Grease fitting: Included
  • Parts diagram position: Item 19
  • Category: Front suspension components
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 lower left A-arm
  • Mounting bolts and nuts: Not advertised as included

Frequently Asked Questions

Does part number 603857 fit the left or right side?

Part number 603857 is designed for the front lower left suspension position of the TAO MOTORS RAPTOR 125 ATV.

Is this an upper or lower A-arm?

This is a lower A-arm. The upper control arm is a separate component, identified by part number 603855.

Are the suspension bushings included?

Yes. According to the EcoBike listing, the suspension bushings are included and pre-installed.

Is the ball joint included?

The listed assembly includes a ball joint with a 10 mm stud, a protective boot and a grease fitting.

What are the dimensions of this lower A-arm?

The listed overall length is 295 mm, with 96 mm between the arms near the bushings, 23 mm between the small bracket tabs and a 10 mm bushing inside diameter.

Is this control arm compatible with the RAPTOR 125 ATV?

Yes. Part number 603857 is listed for the TAO MOTORS RAPTOR 125cc lower left front suspension.

Does it also fit the REX 125 ATV?

This reference is also listed for the TAO MOTORS REX 125. Verify the original mounting configuration before ordering.

Is this a genuine OEM replacement part?

Yes. It is a genuine OEM TAO MOTORS replacement lower left A-arm.

Is the A-arm sold individually?

Yes. Each quantity ordered includes one lower left A-arm. This is not a left-and-right pair.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a wide selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts selection includes upper and lower A-arms, ball joints, nylon bushings, mounting spacers, shock absorbers, bolts and other front suspension components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

603857-Lower Left A-Arm

Specific References