8 Cotter Pin 2.5x30 mm TAO...
  • 8 Cotter Pin 2.5x30 mm TAO...
  • 8 Cotter Pin 2.5x30 mm TAO...

8 Cotter Pin 2.5x30 mm TAO MOTORS RAPTOR 125 ATV

$0.49
Il n'y a pas encore d'avis.
105338 Cotter Pin 2.5 x 30 mm for TAO MOTORS RAPTOR 125 ATV

Genuine OEM cotter pin designed for compatible mechanical fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.

Features a 2.5 mm nominal diameter and 30 mm length for securing specific fasteners installed on drilled shafts or bolts.

Helps retain compatible castle nuts and prevent accidental loosening when properly installed.

Ideal for replacing a worn, bent, damaged or missing original cotter pin during front suspension and steering system maintenance.

Dimensions: 2.5 x 30 mm.

Sold individually.

Available at EcoBike Canada, your supplier of genuine TAO MOTORS replacement parts.

 

Security garantes

 

Quick delivery

Cotter Pin 2.5 x 30 mm for TAO MOTORS RAPTOR 125 ATV

The 105338 Cotter Pin is a genuine OEM TAO MOTORS replacement fastener intended for compatible mechanical assemblies on the RAPTOR 125cc ATV.

This split retaining pin features a 2.5 mm nominal diameter and a 30 mm length.

It is designed to pass through a hole in a compatible shaft or bolt to help secure specific fastening components, including certain castle nuts.

Once inserted, the two ends of the cotter pin are bent apart to help prevent accidental removal.

This small component provides an important mechanical retaining function in properly designed fastening assemblies.

IMPORTANT: This cotter pin is sold individually. One cotter pin is included per quantity ordered.

Why Choose the Genuine OEM 105338 Cotter Pin?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 105338.
  • Nominal diameter: 2.5 mm.
  • Nominal length: 30 mm.
  • Split pin design for mechanical retention.
  • Suitable for compatible castle nut assemblies.
  • Helps prevent unintended fastener movement.
  • Used in corresponding steering and suspension assemblies.
  • Ideal for replacing damaged or missing cotter pins.
  • Sold individually.

An Important Safety Retaining Component

ATV steering and suspension systems contain mechanical connections that must remain securely fastened during operation.

Some assemblies use castle nuts secured with cotter pins to provide an additional mechanical retaining feature.

The cotter pin passes through a drilled shaft or bolt, and its ends are bent to keep it in place.

When properly installed, it helps prevent unintended rotation or removal of the corresponding fastener.

A missing, damaged or incorrectly installed cotter pin may compromise the security of the associated fastening assembly.

Precise 2.5 x 30 mm Dimensions

Part number 105338 features the following nominal specifications:

  • Diameter: 2.5 mm.
  • Length: 30 mm.
  • Fastener type: Split cotter pin.
  • Function: Mechanical retention.
  • Part number: 105338.

The cotter pin must match the hole diameter and retaining requirements of the intended assembly.

Using an incorrectly sized cotter pin may result in improper installation or inadequate retention.

Use with Compatible Castle Nuts

Cotter pins are commonly used with castle nuts, also known as castellated nuts.

After tightening the castle nut according to the manufacturer's procedure, the slots are aligned with the hole in the corresponding threaded shaft.

The cotter pin is inserted through the hole, and its ends are bent to secure it.

Part number 105320 – M10 x 1.25 Castle Nut is an example of a castellated nut listed in TAO MOTORS suspension assemblies. Always verify whether the specific assembly calls for cotter pin 105338.

A cotter pin does not replace proper nut tightening or the manufacturer's fastening procedure.

Replacement and Installation

A cotter pin that has been removed or straightened during disassembly should be replaced with a new pin of the correct dimensions.

Before installation, inspect the drilled hole, castle nut and mating components for wear or damage.

Follow the manufacturer's tightening and alignment procedures before inserting the cotter pin.

Once installed, bend the ends securely to prevent accidental removal.

For steering or suspension applications, carefully inspect the complete fastening assembly before operating the ATV.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 105338
  • Manufacturer description: Cotter Pin
  • Dimensions: 2.5 x 30 mm
  • Application: Compatible steering and suspension fasteners
  • Category: Front suspension and steering hardware

Part number 105338 is also used on several other TAO MOTORS vehicles. Always verify the required part number and dimensions for the specific mounting location before ordering.

Technical Specifications

  • Part number: 105338
  • Part name: Cotter Pin
  • Alternate name: Split Pin
  • Nominal diameter: 2.5 mm
  • Nominal length: 30 mm
  • Component type: Split retaining pin
  • Function: Mechanical fastener retention
  • Application: Compatible drilled shafts and fastening assemblies
  • Category: Suspension and steering hardware
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 cotter pin

Frequently Asked Questions

What is the purpose of the 105338 cotter pin?

It helps secure compatible mechanical fasteners, including castle nuts installed on drilled shafts or bolts.

What are the dimensions of this cotter pin?

It features a nominal diameter of 2.5 mm and a length of 30 mm.

Can this pin be used with a castle nut?

Yes, provided its dimensions and the shaft configuration match the requirements of the specific assembly.

Can I reuse a cotter pin after removing it?

Replacing a removed cotter pin with a new one is recommended, particularly for safety-critical suspension and steering assemblies.

Is this cotter pin intended for the RAPTOR 125 ATV?

This listing is intended for part number 105338 on the TAO MOTORS RAPTOR 125cc ATV. Verify the correct part number for the required mounting location.

Is this a genuine OEM replacement part?

Yes. It is a genuine OEM TAO MOTORS replacement cotter pin.

Is the cotter pin sold individually?

Yes. Each quantity ordered includes one cotter pin. To purchase four pins, select a quantity of four.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a wide selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our inventory includes cotter pins, castle nuts, bolts, washers, bushings, spacers, suspension components and steering hardware for recreational vehicles.

Benefit from our customer service, replacement parts selection and experience with ATV maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

105338-cotter pin

Specific References