Genuine OEM aluminum front wheel rim designed for the TAO MOTORS RAPTOR 125cc ATV.
Features an 8-inch diameter and a 4-hole mounting configuration for compatible front wheel assemblies.
Listed dimensions: 8 x 5 1/2 inches. Suitable for the corresponding left or right front wheel position.
Ideal for replacing a cracked, bent, damaged or worn original rim.
Helps restore the original wheel mounting configuration and factory appearance of the ATV.
Sold individually – One aluminum front rim, tire not included.
Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.
Security garantes
Quick delivery
The 115034 Aluminum Front Rim is a genuine OEM TAO MOTORS replacement part designed for the RAPTOR 125cc ATV.
Also known as a front aluminum wheel rim or front ATV mag wheel, this component is designed to support the corresponding front tire and attach to the compatible wheel hub.
Part number 115034 is identified in the ATA125-K parts catalog as Rim – Front ATA125-K; Aluminium.
The rim features an 8-inch nominal diameter, a listed 5 1/2-inch width and a 4-hole mounting configuration.
It is intended to replace a damaged, cracked or bent factory rim while preserving the original wheel configuration of the ATV.
IMPORTANT: This aluminum front rim is sold individually. One rim is included per quantity ordered. Tire, valve stem and additional mounting accessories are not advertised as included.
The front wheels of an ATV are essential to steering, vehicle handling and overall stability.
The wheel rim supports the tire and connects it to the appropriate mounting hub.
During ATV operation, front wheels are exposed to bumps, uneven surfaces and other mechanical forces.
Using a correctly sized and properly installed rim helps preserve the wheel configuration specified by the manufacturer.
The 115034 aluminum rim is designed as a replacement for the corresponding original front wheel component.
Part number 115034 is identified as an 8-inch aluminum front rim.
The EcoBike listing specifies dimensions of 8 x 5 1/2 inches.
The first measurement identifies the rim's nominal diameter, while the second indicates its listed width.
Both measurements are important when selecting a replacement rim and checking tire compatibility.
Important: Not all 8-inch ATV rims are interchangeable. Width, mounting configuration and hub compatibility must also be verified.
The 115034 front rim features a four-hole mounting design.
These mounting holes allow the rim to attach to the corresponding front wheel hub using the specified fastening hardware.
Before installation, compare the mounting holes with the original rim.
Verify the bolt pattern, hole spacing, mounting surfaces and hub configuration.
The exact bolt circle measurement should be confirmed on the actual rim or through the vehicle's technical specifications.
A rim with four mounting holes is not necessarily compatible with every four-bolt ATV hub.
The TAO MOTORS ATA125-K parts catalog lists two aluminum front rims with part number 115034 for the complete front wheel assembly.
The same OEM reference is used for the corresponding left and right front wheel positions.
When mounting directional tires, always follow the correct tire rotation direction for each side of the vehicle.
To replace one front rim, order a quantity of 1. To replace both front rims, order a quantity of 2.
The ATA125-K parts catalog lists a 19 x 7-8 front tire under part number 102015.
The tire size designation indicates:
Before installing a tire, verify the tire manufacturer's approved rim width and the vehicle's original specifications.
The 102015 front tire is a separate replacement part and is not included with this rim.
Several components are used to assemble a complete ATV front wheel.
These are separate components with different functions. They should not be assumed to be included with the aluminum rim.
Front wheel rims should be inspected during routine tire maintenance and following significant impacts.
Common reasons for replacement include:
Wheel vibration and air pressure loss may also result from damaged tires, valve stems, hubs or other components.
Inspect the complete wheel assembly to identify the cause before replacing individual parts.
Before installation, compare the replacement rim directly with the original component.
Confirm the nominal diameter, width, mounting hole configuration and wheel hub compatibility.
Inspect the hub, mounting fasteners, tire and valve stem for wear or damage.
Use a compatible tire and follow the tire manufacturer's mounting and inflation specifications.
Install the wheel using the vehicle manufacturer's recommended assembly procedure and tightening torque.
After installation, ensure that the wheel is properly centered and secured.
Verify that the tire is correctly seated and that the wheel rotates without abnormal movement or interference.
Professional installation is recommended when wheel or tire mounting procedures are unfamiliar.
This part number is also listed for certain TAO MOTORS NEW T-FORCE and NEW CHEETAH models.
Before ordering for another ATV, verify the original wheel dimensions, bolt pattern and mounting configuration.
The EcoBike listing specifies an 8-inch aluminum rim with a listed width of 5 1/2 inches.
Part number 115034 features a four-hole mounting configuration. Verify the bolt pattern and hole spacing before ordering.
Yes. Part number 115034 is listed in the ATA125-K front suspension parts catalog for the corresponding TAO MOTORS RAPTOR 125cc wheel assembly.
Yes. The ATA125-K catalog lists the same rim reference for both front wheel positions. Any directional tire must be mounted according to its required rotation direction.
The ATA125-K catalog identifies a 19 x 7-8 front tire with part number 102015. Always confirm tire-to-rim compatibility before mounting.
No. This listing is for the aluminum front rim only. The tire and valve stem are separate components.
No. The rim supports the tire and attaches to the hub. The wheel hub is a separate mechanical component.
Yes. Part number 115034 is a genuine OEM TAO MOTORS aluminum front rim.
Yes. One rim is included per quantity ordered. To replace both front rims, select a quantity of two.
At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.
Our parts selection includes aluminum rims, tires, valve stems, wheel hubs, center caps, bearings and other front suspension and wheel components.
Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.
www.eco-bike.ca