25 Front Wheel Acorn Nut...
  • 25 Front Wheel Acorn Nut...
  • 25 Front Wheel Acorn Nut...

25 Front Wheel Acorn Nut TAO MOTORS RAPTOR 125 ATV

$4.99
Il n'y a pas encore d'avis.
105289 M8 Acorn Nut for TAO MOTORS RAPTOR 125 ATV

Genuine OEM front wheel acorn nut designed for compatible rim fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.

Also known as a cap nut or dome nut, this fastener features an M8 nominal thread diameter and a closed, rounded end.

Its hexagonal body allows tightening with a suitable wrench, while the closed end covers the exposed threaded stud when properly fitted.

Ideal for replacing a worn, damaged, corroded or missing original wheel nut.

Nominal size: M8.

Sold individually – One acorn nut included.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

M8 Front Wheel Acorn Nut for TAO MOTORS RAPTOR 125 ATV

The 105289 M8 Acorn Nut is a genuine OEM TAO MOTORS replacement fastener designed for compatible front wheel assemblies on the RAPTOR 125cc ATV.

Also called a cap nut, dome nut or closed-end hex nut, this component features a hexagonal body and a rounded, closed end.

Part number 105289 is listed in the ATA125-K front suspension parts catalog as Acorn Nut M8.

It is used in the corresponding wheel fastening assemblies and is designed to replace a worn, damaged or missing factory nut.

The closed-end design covers the exposed end of a compatible threaded stud while providing a finished appearance.

IMPORTANT: This acorn nut is sold individually. One M8 acorn nut is included per quantity ordered, not a set of four or eight.

Why Choose the Genuine OEM 105289 Acorn Nut?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 105289.
  • Listed for the RAPTOR 125cc ATV.
  • M8 nominal thread diameter.
  • Hexagonal six-sided design.
  • Rounded closed-end dome.
  • Listed in the front suspension parts catalog.
  • Designed for compatible front wheel fastening applications.
  • Covers the end of a compatible threaded stud.
  • Helps restore the original wheel fastening appearance.
  • Replaces worn, damaged or missing factory nuts.
  • Sold individually.

An Important Front Wheel Fastening Component

The front wheel assemblies of the TAO MOTORS RAPTOR 125 include wheel rims, hubs and corresponding mounting hardware.

Wheel nuts secure the rims to their mounting components when properly installed according to the manufacturer's specifications.

The 105289 Acorn Nut appears at diagram position 25 in the ATA125-K front suspension catalog.

Using the correct fastener helps maintain the original wheel mounting configuration.

A missing, damaged or incorrectly fitted wheel nut can compromise the security of the wheel assembly and must be corrected before operating the ATV.

Closed-End Dome Design

Unlike a conventional hex nut, an acorn nut features a closed, rounded upper section.

This design covers the end of the mating threaded stud when the stud length is compatible with the nut's internal depth.

The dome also gives the wheel fastening assembly a clean, finished appearance.

Its hexagonal body allows installation with an appropriately sized wrench or socket.

Important: The stud must not bottom out inside the closed end before the nut provides the required clamping force.

Always verify the thread engagement and seating surface before installation.

M8 Thread Size and Fitment

Part number 105289 is identified with the following nominal characteristics:

  • Nominal diameter: M8 (8 mm).
  • Thread pitch listed by one supplier: 1.25 mm.
  • Fastener type: Acorn nut.
  • Body shape: Hexagonal.
  • Upper section: Closed rounded dome.
  • OEM reference: 105289.

The TAO MOTORS parts catalog identifies the nut as M8 without consistently specifying the thread pitch.

Another supplier lists the same part number with an M8 x 1.25 thread specification.

Before installation, compare the replacement fastener with the original to confirm the thread pitch, internal depth and seating configuration.

A nut with the same nominal diameter is not automatically interchangeable if its thread pitch or seating surface differs.

How Many Acorn Nuts Are Used on the RAPTOR 125?

The ATA125-K front suspension catalog lists 8 acorn nuts with part number 105289 for the complete front wheel assembly.

This represents the quantity identified in the vehicle parts catalog, not the number of nuts included with this product.

To replace one nut, order a quantity of 1. To purchase eight nuts, select a quantity of 8.

Always verify the actual number of wheel fasteners and mounting configuration on your specific ATV.

When Should an Acorn Nut Be Replaced?

Wheel fastening hardware should be inspected during tire replacement, wheel maintenance and routine servicing.

Replacement may be required if the original nut shows:

  • Damaged or worn internal threads.
  • Rounded hexagonal surfaces.
  • Visible cracks or deformation.
  • Excessive corrosion.
  • Damaged seating surfaces.
  • Damage caused by improper tightening.
  • A missing original wheel fastener.

Inspect the corresponding wheel studs and mounting components for damage before reassembly.

Replacement and Installation

Before installation, compare the new nut directly with the original component.

Confirm the thread diameter, pitch, internal depth and seating configuration.

Make sure the threaded stud does not bottom out inside the dome before the wheel is correctly secured.

Install and tighten the wheel fasteners using the manufacturer's specified procedure, tightening sequence and torque.

After installation, verify that the wheel is securely mounted and that all required fasteners are present.

Never operate the ATV with missing, damaged or improperly tightened wheel nuts.

Difference Between Acorn Nut 105289 and Locknut 105276

The TAO MOTORS RAPTOR 125 uses different types of M8 fastening hardware.

  • 105289 – Acorn Nut M8: Closed-end dome nut used in corresponding wheel fastening assemblies.
  • 105276 – Hex Locknut M8: Hexagonal locking nut used in other compatible mechanical assemblies.

These two part numbers represent different fastening configurations and should not be considered interchangeable.

Always use the specific fastener required for the original mounting location.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 105289
  • Manufacturer description: Acorn Nut M8
  • Application: Compatible front wheel rim fastenings
  • Category: Front end and suspension

Part number 105289 is also listed for certain TAO MOTORS T-FORCE, NEW T-FORCE, CHEETAH and NEW CHEETAH ATVs.

Verify the original part number and wheel mounting configuration before ordering for another vehicle.

Technical Specifications

  • Part number: 105289
  • Part name: Acorn Nut
  • Alternate names: Cap Nut / Dome Nut
  • Nominal diameter: M8 (8 mm)
  • Thread pitch: 1.25 mm according to supplier; verify fitment
  • Body shape: Hexagonal
  • End design: Closed rounded dome
  • Component type: Mechanical fastening nut
  • Application: Compatible front wheel rim fastenings
  • ATA125-K diagram position: 25
  • Quantity listed for front assembly: 8
  • Category: Front end and suspension
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 acorn nut
  • Wheel stud, rim and hub: Not included

Frequently Asked Questions

What is the purpose of the 105289 acorn nut?

It is used in compatible front wheel rim fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.

What is an acorn nut?

An acorn nut is a closed-end hexagonal nut with a rounded dome that covers the end of a compatible threaded stud.

What is the thread size?

The manufacturer identifies this fastener as M8. One supplier specifies an M8 x 1.25 thread. Verify the pitch against the original nut before installation.

Is this nut compatible with the RAPTOR 125 ATV?

Yes. Part number 105289 appears at position 25 in the ATA125-K front suspension parts catalog.

How many acorn nuts are used in the front assembly?

The ATA125-K parts catalog lists eight acorn nuts with part number 105289 for the complete front assembly.

Is this a self-locking nut?

The Acorn Nut designation confirms a closed-end design, but does not establish a self-locking feature. Always use the specific fastening type required by the manufacturer.

Is this the same as part number 105276?

No. Part number 105289 is an M8 acorn nut, while 105276 is an M8 hex locknut. They are different fastening components.

Is this a genuine OEM replacement part?

Yes. This is a genuine OEM TAO MOTORS replacement nut.

Is the acorn nut sold individually?

Yes. One acorn nut is included per quantity ordered. To purchase eight nuts, select a quantity of eight.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts selection includes wheel nuts, bolts, locknuts, washers, wheel studs, aluminum rims, hubs and other replacement components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

105289-Acorn Nut M8

Specific References