• New
18 Front Wheel Spindle TAO...
  • 18 Front Wheel Spindle TAO...
  • 18 Front Wheel Spindle TAO...

18 Front Wheel Spindle TAO MOTORS RAPTOR 125 ATV

$59.99
Il n'y a pas encore d'avis.
102894 Front Wheel Spindle for TAO MOTORS RAPTOR 125 ATV

Genuine OEM front wheel spindle for the TAO MOTORS RAPTOR 125cc ATV.

Essential front suspension and steering component designed to support the corresponding wheel hub and steering assembly.

Available for the front right or front left side.

Ideal for replacing a bent, cracked or damaged original spindle.

Select your side: RIGHT or LEFT.

Sold individually by side. One spindle included.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

Front Wheel Spindle for TAO MOTORS RAPTOR 125 ATV

The 102894 Front Wheel Spindle is a genuine OEM TAO MOTORS replacement part designed for compatible front suspension and steering assemblies on the RAPTOR 125cc ATV.

Also known as a front steering spindle or front steering knuckle, this component provides an important mechanical connection between the front wheel hub, suspension arms and steering components.

The spindle helps maintain correct front wheel positioning and allows the corresponding wheel to turn during steering maneuvers.

It is intended to replace a bent, cracked, damaged or otherwise defective original front spindle.

IMPORTANT: EcoBike sells front spindles individually by side. You must select RIGHT or LEFT from the product options before ordering.

Each quantity ordered includes ONE front spindle for the selected side. This product is NOT sold as a pair.

Why Choose the Genuine OEM 102894 Front Spindle?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 102894.
  • Listed for compatible RAPTOR 125cc ATV configurations.
  • Available for the right or left front wheel position.
  • Sold individually according to the selected side.
  • Important front suspension and steering component.
  • Provides a mounting connection for the corresponding wheel hub.
  • Helps guide front wheel steering movement.
  • Contributes to proper front-end geometry.
  • Replaces damaged or bent original spindles.
  • Suitable for front suspension and steering repairs.
  • One spindle per quantity ordered, not a pair.

Select Your Side: RIGHT or LEFT

The TAO MOTORS RAPTOR 125 uses front spindle components on both sides of the front suspension.

EcoBike offers separate side selections so customers can purchase only the replacement spindle they need.

  • LEFT Front Spindle: Designed for the corresponding left front wheel position.
  • RIGHT Front Spindle: Designed for the corresponding right front wheel position.

To identify the correct side, sit on the ATV in the normal riding position and face forward.

The left side is on your left, and the right side is on your right.

Left and right front spindles may have different shapes or mounting configurations and should not be interchanged without confirming compatibility.

Before adding the product to your cart, select RIGHT or LEFT according to the side you need to replace.

A quantity of 1 means one spindle for the selected side only. To replace both sides, order one LEFT spindle and one RIGHT spindle separately.

An Essential Front Suspension and Steering Component

The TAO MOTORS RAPTOR 125 front suspension includes several components that work together to control front wheel positioning and steering movement.

These components include upper and lower A-arms, ball joints, front wheel hubs, steering connections, shock absorbers and spindles.

The front spindle forms part of the mechanical connection between the wheel assembly and the surrounding suspension and steering components.

When the rider turns the handlebars, the steering system transfers movement to the front wheel assemblies.

The spindle helps support the corresponding steering movement while maintaining the required mounting geometry.

A correctly fitted and undamaged spindle is therefore important for proper front-end operation.

Helps Maintain Front Wheel Alignment and Geometry

Front suspension geometry depends on the position and condition of several mechanical components.

The spindles, ball joints, control arms and steering connections must remain correctly aligned.

A spindle can become bent following an impact with a rock, stump or other obstacle.

Even a relatively small deformation may affect the front wheel position or steering response.

Potential effects may include abnormal wheel angles, difficulty achieving proper alignment or inconsistent steering behavior.

Replacing a damaged spindle with the correct genuine OEM part helps restore the intended assembly.

Other front suspension components should also be inspected following a significant impact.

Check Front Brake System Compatibility

Depending on the model and production version, TAO MOTORS ATVs may use different front brake configurations.

Some versions feature drum brakes, while others use disc brakes.

These configurations may require different spindle shapes, mounting points or associated wheel hub components.

Before ordering part number 102894, verify:

  • The exact ATV model and production configuration.
  • The required LEFT or RIGHT side.
  • The type of front brakes installed.
  • The shape of the original spindle.
  • The location of the suspension mounting points.
  • The compatible wheel hub configuration.
  • The original part reference, when available.

Important: Similar-looking front spindles are not necessarily interchangeable between different braking or suspension configurations.

Front Spindle vs. Wheel Hub vs. Wheel Rim

Several different components are used in the ATV front wheel assembly.

  • 102894 – Front Wheel Spindle: Steering and suspension component supporting the corresponding front wheel mounting assembly.
  • Front Wheel Hub: Provides the mechanical mounting connection between the wheel and spindle assembly.
  • 115034 – Aluminum Front Rim: Wheel rim designed to support the corresponding front tire.
  • 102015 – Front Tire: 19 x 7-8 tire listed for the RAPTOR 125 front wheel assembly.
  • 105326 – Castle Nut: M14 x 1.5 mm fastening component listed in the front assembly.
  • 105414 – Flat Washer: 14 x 40 x 2 mm fastening washer.
  • 105340 – Cotter Pin: Retaining hardware for the corresponding front wheel mounting arrangement.

Each of these components performs a different function within the front suspension and wheel assembly.

This product listing is for the front spindle on the selected side only. Wheel hub, rim, tire and additional fastening components are not advertised as included.

When Should a Front Wheel Spindle Be Replaced?

Front wheel spindles are exposed to steering loads, vibration and impacts transmitted through the front suspension.

Following a significant impact or collision, the front-end components should be carefully inspected.

Replacement may be required if the original spindle shows:

  • Visible bending or deformation.
  • Cracks or structural damage.
  • Damaged spindle threads.
  • Deformed suspension mounting points.
  • Damaged steering connection points.
  • Abnormal front wheel positioning.
  • Difficulty achieving correct wheel alignment.
  • Irregular steering behavior after an impact.
  • Damage to corresponding mounting surfaces.

Some of these symptoms may also result from worn ball joints, damaged control arms, wheel bearings or other components.

Inspect the complete front suspension before determining which replacement parts are required.

Replacement and Installation

Before installation, compare the new spindle directly with the original component.

Confirm the selected side, mounting geometry, dimensions and front brake compatibility.

Inspect the upper and lower control arms, ball joints, wheel hub, bearings and fastening hardware.

Replace damaged or worn components that may affect proper mounting or safe operation.

Install the spindle according to the manufacturer's specified procedure and tightening requirements.

If the assembly uses a castle nut and cotter pin, install the specified retaining hardware correctly.

After installation, check steering movement, front wheel mounting, brake operation and the absence of excessive play.

A front wheel alignment inspection is recommended following major suspension or spindle repairs.

Professional installation is recommended because this component is directly associated with wheel retention and steering safety.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 102894
  • Manufacturer description: Front Spindle
  • Position: Front suspension
  • Available options: RIGHT or LEFT
  • Application: Front wheel and steering assembly
  • Category: Front end and suspension

Part number 102894 also appears in selected TAO MOTORS ATA125-K, ATK125 and REX 125 parts applications.

Verify the original component, mounting geometry and front brake configuration before ordering for another ATV.

Technical Specifications

  • Part number: 102894
  • Part name: Front Wheel Spindle
  • Alternate name: Front Steering Spindle
  • Component type: Front suspension and steering component
  • Position: Front
  • Side: RIGHT or LEFT, selected separately
  • PrestaShop options: RIGHT / LEFT
  • ATA125-K diagram position: 18
  • Quality: Genuine OEM replacement part
  • Vehicle: Compatible TAO MOTORS RAPTOR 125cc ATV
  • Commercial packaging: Sold individually by side
  • Quantity included: 1 spindle for the selected side
  • Left-and-right pair: Not included
  • Exact measurements: Compare with the original component
  • Front brake configuration: Verify vehicle compatibility
  • Wheel hub, rim and other components: Inclusion not confirmed

Frequently Asked Questions

What is the purpose of the 102894 front spindle?

It provides a mechanical connection between the front wheel assembly, suspension and steering components, helping maintain wheel positioning and steering movement.

Is the 102894 front spindle compatible with the RAPTOR 125 ATV?

Part number 102894 is listed in the ATA125-K front suspension parts catalog. Confirm the required side and the vehicle's exact configuration before ordering.

Is this front spindle sold individually?

Yes. EcoBike sells each spindle separately by side. Select RIGHT or LEFT before placing your order.

Will I receive both front spindles?

No. A quantity of 1 includes only one front spindle for the selected side. To replace both sides, purchase one RIGHT spindle and one LEFT spindle separately.

How do I choose the correct side?

Determine the side while sitting on the ATV in the normal riding position and facing forward. Then select RIGHT or LEFT in the product options.

Can I install a right spindle on the left side?

Left and right front spindle configurations may differ. Do not interchange them without confirmed technical compatibility.

Does this spindle fit disc brake or drum brake models?

Compatibility depends on the specific front suspension and brake configuration. Compare the original spindle and mounting points before ordering.

Is the front wheel hub included?

The wheel hub and other wheel components are not advertised as included. Verify the details of the selected product.

When should a front spindle be replaced?

A bent, cracked or damaged spindle should be inspected and replaced if its condition affects the geometry or safe operation of the front wheel assembly.

Is this a genuine OEM replacement part?

Yes. This listing is for genuine OEM TAO MOTORS replacement part number 102894.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts catalog includes front spindles, wheel hubs, bearings, ball joints, suspension control arms, shock absorbers, aluminum rims, tires and other mechanical components.

Benefit from our replacement parts selection, customer service and experience with recreational vehicle assembly, maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

102894 Spindle raptor 125

Specific References