Genuine OEM front ATV tire designed for the TAO MOTORS RAPTOR 125cc.
Features nominal dimensions of 19 x 7-8 inches and fits the corresponding 8-inch front wheel rim.
Designed for recreational ATV riding on suitable off-road surfaces, helping provide traction and steering control.
Ideal for replacing a worn, cracked, damaged or unevenly worn original front tire.
Suitable for the corresponding left or right front wheel, following any applicable tire rotation markings.
Tire size: 19 x 7-8 inches.
Sold individually – One tire, rim not included.
Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.
Security garantes
Quick delivery
The 102015 Front ATV Tire is a genuine OEM TAO MOTORS replacement part intended for the RAPTOR 125cc ATV.
Identified in the parts catalog as 8" Tire 19x7-8, this tire is designed for the corresponding front wheel assemblies.
It features nominal dimensions of 19 x 7-8 inches and is intended for a compatible 8-inch wheel rim.
The front tires play an important role in steering, traction and overall vehicle handling during recreational off-road riding.
The tire tread provides contact with the riding surface and helps the front wheels respond to steering input.
Part number 102015 is intended to replace a worn, cracked or damaged original tire while maintaining the specified wheel size.
IMPORTANT: This tire is sold individually. One 19 x 7-8 front tire is included per quantity ordered. Wheel rim, valve stem and other mounting accessories are not included.
Front tires are important components of an ATV's steering and handling systems.
When riding across uneven terrain, the front tires must respond to changes in direction while maintaining contact with the ground.
Tread design, tire construction and inflation pressure all influence how a tire performs on different riding surfaces.
The 102015 tire is listed for the corresponding front wheel assembly of the TAO MOTORS RAPTOR 125.
Replacing worn tires with the correct size helps maintain the vehicle's original wheel configuration.
The exact tread pattern may vary between available versions of this tire size. Always compare the actual replacement tire with the original component.
The size designation 19 x 7-8 provides three important nominal measurements:
These measurements help identify the correct replacement tire for the original front wheel assembly.
Actual overall dimensions may vary slightly depending on tire construction, manufacturer and inflation pressure.
Important: Not every tire designed for an 8-inch rim is interchangeable. Overall tire diameter, width, approved rim dimensions and other specifications must also be considered.
The ATA125-K parts catalog lists 102015 – 19 x 7-8 Front Tire in the front suspension and wheel assembly.
The same catalog identifies the 115034 Aluminum Front Rim as a corresponding wheel component.
These part numbers help identify the original wheel assembly components for the vehicle.
Before installing a new tire, verify the actual rim width and the approved tire-to-rim fitment.
The aluminum rim, wheel hub, center cap and valve stem are separate components and are not included with this tire.
Part number 102015 is intended for the corresponding front wheel positions of the RAPTOR 125 ATV.
The tire can be used on the left or right front wheel, provided the wheel configuration and tire installation requirements are respected.
If the tire has a directional tread pattern, follow the rotation arrow marked on its sidewall.
To replace one front tire, order a quantity of 1. To replace both front tires, select a quantity of 2.
Inspect both front tires when evaluating wear, damage or differences in tread characteristics.
Front tires should be inspected regularly to maintain proper traction and steering performance.
Replacement may be necessary if the original tire shows:
Air pressure loss can also result from a damaged valve stem or wheel rim. Inspect the complete wheel assembly before identifying the cause.
Correct inflation pressure is important for tire performance, steering response and service life.
Use the vehicle manufacturer's recommended operating pressure for the installed tire and respect all applicable tire limitations.
Do not assume that the maximum pressure marked on the tire sidewall is the correct operating pressure for the ATV.
Check tire pressure when the tires are cold and inspect the tread, sidewalls and valve stems regularly.
Remove debris from the tread and inspect the tires after significant impacts or rough terrain riding.
Before installation, confirm that the new tire matches the dimensions specified for the vehicle.
Inspect the wheel rim for cracks, deformation and damage to the tire seating surfaces.
Check the condition of the valve stem and verify whether the tire and rim assembly requires an inner tube.
If a tire rotation direction is marked, install the tire in the specified orientation.
Use appropriate tire mounting equipment to avoid damaging the tire bead or rim.
After installation, confirm proper tire seating, correct inflation pressure and the absence of air leaks.
Professional mounting is recommended when the installer is unfamiliar with ATV tire installation procedures.
This part number is also marketed for certain TAO MOTORS T-FORCE, CHEETAH and MUDHAWK models.
Before ordering for another ATV, verify the original tire dimensions, tread version and mounting requirements.
Part number 102015 identifies a front ATV tire with nominal dimensions of 19 x 7-8 inches, intended for a compatible 8-inch rim.
Yes. Part number 102015 is listed in the ATA125-K parts catalog for the corresponding front wheel assembly.
Yes, provided the corresponding wheel configuration is compatible and any tire rotation markings are respected.
The ATA125-K parts catalog lists aluminum front rim 115034 in the corresponding assembly. Always confirm rim width and fitment before installation.
No. This product listing includes one tire only. The wheel rim and other wheel components are sold separately.
The exact tire construction must be verified using the markings on the supplied tire. Inner tube requirements depend on the tire and rim configuration.
Use the vehicle manufacturer's recommended tire pressure for the installed tire while respecting the limitations marked on the tire sidewall.
Yes. This listing is intended for genuine OEM TAO MOTORS replacement tire part number 102015.
Yes. One tire is included per quantity ordered. To replace both front tires, select a quantity of two.
At EcoBike Canada, we offer a selection of genuine OEM replacement parts and tires for TAO MOTORS ATVs.
Our parts selection includes front and rear tires, aluminum wheel rims, valve stems, wheel hubs, bearings and other mechanical components.
Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts and ATV Tires.
www.eco-bike.ca