Genuine OEM hex nut designed for mechanical fastening and compatible front suspension assemblies on the TAO MOTORS RAPTOR 125cc ATV.
Features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.
Its six-sided hexagonal design allows installation and tightening with a suitable wrench or socket.
Ideal for replacing a worn, damaged or missing original nut while maintaining the required factory thread specifications.
Thread size: M10 x 1.25 mm.
Sold individually.
Available at EcoBike Canada, your supplier of genuine TAO MOTORS OEM replacement parts.
Security garantes
Quick delivery
The 105253 M10 x 1.25 Hex Nut is a genuine OEM TAO MOTORS replacement fastener designed for compatible mechanical assemblies on the RAPTOR 125cc ATV.
This hexagonal nut features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.
Part number 105253 is listed among the front suspension components of the TAO MOTORS RAPTOR 125.
Its six-sided design allows the nut to be installed and tightened using an appropriate wrench or socket.
It is ideal for replacing a worn, damaged or missing original fastening nut while preserving the manufacturer's specified thread dimensions.
IMPORTANT: This hex nut is sold individually. One nut is included per quantity ordered.
The front suspension system of an ATV includes various mechanical components secured with bolts, nuts, washers and other mounting hardware.
These fasteners must be correctly installed and tightened to maintain the intended mounting arrangement.
Part number 105253 is listed in the RAPTOR 125 front suspension parts category.
Replacing a worn or damaged nut with a correctly specified genuine OEM fastener helps maintain the original assembly.
The correct nut must match both the thread diameter and thread pitch of its corresponding bolt or threaded component.
The 105253 hex nut features the following specifications:
The 1.25 mm thread pitch is an important specification when selecting the correct replacement fastener.
Important: An M10 x 1.5 mm standard-thread nut is not interchangeable with this M10 x 1.25 mm nut.
Installing a nut with an incorrect thread pitch may damage the mating bolt or threaded shaft.
Different types of M10 x 1.25 nuts are used in TAO MOTORS mechanical assemblies.
Although these fasteners may share the same nominal thread diameter and pitch, their retention features and intended applications differ.
Always use the specific fastener type and part number required for the original assembly.
Inspect mechanical fasteners whenever the corresponding assembly is disassembled for maintenance or repairs.
Replacement may be necessary if the original nut shows:
Damaged fastening hardware should not be reused in safety-critical assemblies.
Before installation, compare the new nut with the original component to confirm the part number, thread size and overall configuration.
Inspect the mating bolt or threaded shaft for damaged or worn threads.
Start the nut carefully and never force incompatible threads.
Follow the manufacturer's recommended tightening specifications for the applicable assembly.
If the original assembly requires additional washers, locking hardware or retaining devices, install those components as specified.
After completing the repair, inspect the front suspension fastenings before operating the ATV.
Part number 105253 is also used on various TAO MOTORS ATVs and motorcycles. Always verify the original reference and thread specifications before ordering for another vehicle.
Part number 105253 identifies an M10 x 1.25 mm hexagonal fastening nut for compatible TAO MOTORS ATV assemblies.
No. This product is a fastening nut, not a threading tool. The original catalog identifies it as a Hex Nut.
It has an M10 nominal diameter of 10 mm and a fine thread pitch of 1.25 mm.
No. An M10 x 1.5 nut has a different thread pitch and is not interchangeable with an M10 x 1.25 nut.
No. Part number 105253 is identified as a Hex Nut, while part number 105254 is a Hex Locknut. Always verify the specified fastener type.
Yes. Part number 105253 is listed in the front suspension category for the TAO MOTORS RAPTOR 125cc ATV.
Yes. It is a genuine OEM TAO MOTORS replacement fastener.
Yes. Each quantity ordered includes one nut. To purchase four nuts, select a quantity of four.
At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.
Our parts selection includes hex nuts, locknuts, castle nuts, bolts, washers, cotter pins, bushings, spacers and suspension components for recreational vehicles.
Benefit from our customer service, replacement parts selection and experience with ATV maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.
www.eco-bike.ca