• New
21 ATV Tire Valve TAO...
  • 21 ATV Tire Valve TAO...
  • 21 ATV Tire Valve TAO...

21 ATV Tire Valve TAO MOTORS RAPTOR 125

$59.99
Il n'y a pas encore d'avis.
100537 Tire Valve Stem for TAO MOTORS RAPTOR 125 ATV

Genuine OEM tire valve stem designed for compatible wheel rims on the TAO MOTORS RAPTOR 125cc ATV.

Allows tires to be inflated and helps maintain proper air pressure for safe and reliable ATV operation.

Features rubber and metal components designed to provide an airtight seal when correctly installed on a compatible rim.

Listed in both front and rear wheel assemblies of the ATA125-K ATV family.

Ideal for replacing a cracked, worn, damaged or leaking original tire valve.

Application: Front and rear tires on compatible rims.

Sold individually – One tire valve included.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

Tire Valve Stem for TAO MOTORS RAPTOR 125 ATV

The 100537 Tire Valve Stem is a genuine OEM TAO MOTORS replacement part designed for compatible wheel rims on the RAPTOR 125cc ATV.

Also known as a tire inflation valve, wheel valve or valve stem, this component allows air to be added to a tire and helps maintain the required inflation pressure.

Part number 100537 appears in TAO MOTORS ATA125-K parts catalogs for both front and rear wheel assemblies.

EcoBike describes this valve as featuring rubber and metal components designed to provide reliable sealing on compatible ATV rims.

A properly functioning tire valve is important for maintaining air pressure, tire performance and vehicle handling.

This genuine OEM replacement is ideal for a worn, cracked, damaged or leaking original tire valve.

IMPORTANT: This tire valve is sold individually. One valve stem is included per quantity ordered, not a set of four valves.

Why Choose the Genuine OEM 100537 Tire Valve?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 100537.
  • Listed for compatible RAPTOR 125cc ATV wheel assemblies.
  • Used in the corresponding front and rear wheel assemblies.
  • Allows convenient tire inflation.
  • Helps maintain proper tire air pressure.
  • Rubber and metal construction as described by EcoBike.
  • Designed for compatible ATV wheel rims.
  • Helps prevent air leakage at the inflation point.
  • Replaces worn, cracked or damaged factory valves.
  • Useful during tire and wheel rim replacement.
  • Sold individually.

An Essential Component for Maintaining Tire Pressure

ATV tires require the correct inflation pressure to perform as intended.

The tire valve provides an access point for adding air through a compatible inflation tool.

When functioning correctly, the valve mechanism closes after inflation to help retain air inside the tire.

The valve must also seal correctly against the wheel rim at its mounting point.

A cracked, damaged or improperly installed valve may allow air to escape.

Loss of tire pressure can affect traction, steering response, stability and tire wear.

Replacing a defective tire valve with the appropriate OEM part helps restore the sealing function of the wheel assembly.

Front and Rear Tire Valve Applications

Part number 100537 is listed in the TAO MOTORS ATA125-K family parts catalogs for both front and rear wheel assemblies.

  • Front wheels: Diagram position 21, quantity of 2 valves.
  • Rear wheels: Diagram position 20, quantity of 2 valves.

This means the same valve reference is specified for the corresponding front and rear wheel assemblies in these parts diagrams.

Always verify that the rims installed on the ATV match the original configuration, particularly if aftermarket wheels have been fitted.

To replace one valve, order a quantity of 1. To replace all four valves on a vehicle using this reference for every wheel, select a quantity of 4.

Rubber and Metal Valve Construction

EcoBike's existing listing for part number 100537 describes a valve made with rubber and a metal component.

The rubber portion helps provide sealing at the corresponding mounting opening in the rim.

The metal components form part of the inflation valve mechanism.

These elements work together to allow inflation while helping prevent air loss.

Correct fitment is essential for proper sealing.

Important: The exact valve length, rim hole diameter and mounting profile should be checked against the actual part before substituting a universal valve stem.

Compatible ATV Wheel Rims

The RAPTOR 125 wheel assemblies include several distinct components, such as tires, rims, hubs and valve stems.

Part number 100537 is listed in both the front and rear wheel sections of the ATA125-K family catalogs.

The front wheel catalog also identifies tire part number 102015, with nominal dimensions of 19 x 7-8 inches.

However, the tire size alone does not determine valve stem compatibility.

The wheel rim's valve hole diameter, mounting design and tire configuration must also be considered.

Always compare the replacement valve with the original valve and verify the rim requirements before installation.

This product includes the valve stem only. The tire, rim and other wheel components are sold separately.

Why Does a Tire Valve Leak?

A tire valve can develop leaks as its sealing surfaces or internal components wear or become damaged.

Common causes include:

  • Cracked or deteriorated rubber.
  • A damaged valve body.
  • A leaking internal valve mechanism.
  • Improper sealing between the valve and rim.
  • Damage caused during tire removal or installation.
  • Impact damage.
  • Corrosion or contamination affecting the valve components.

A leak near the valve does not always mean the valve is the only problem. The rim and surrounding wheel components should also be inspected.

When Should a Tire Valve Be Replaced?

Tire valves should be checked during routine maintenance and whenever a tire loses air unexpectedly.

Replacement may be necessary if the original valve shows:

  • Visible rubber cracks.
  • Damage or deformation.
  • Air leakage at the base of the valve.
  • Air leakage through the internal valve mechanism.
  • A broken or damaged valve stem.
  • Significant deterioration of the sealing surface.
  • Repeated difficulty maintaining tire pressure.
  • Damage discovered during tire replacement.

Depending on its condition, preventive valve replacement may also be appropriate when fitting a new tire.

Replacement and Installation

Before installation, compare the new tire valve with the original component.

Verify the mounting diameter, shape, length and sealing configuration.

Inspect the wheel rim around the valve mounting hole for corrosion, sharp edges or damage.

Clean the mounting area and use the correct tools for the valve type.

Install the valve according to the applicable rim and tire mounting procedures.

Ensure that the sealing surfaces are correctly positioned and undamaged.

After installing the tire, inflate it to the operating pressure recommended by the vehicle manufacturer.

Check for air leaks around the valve base and internal valve mechanism.

Professional installation is recommended when tire removal or specialized tire mounting equipment is required.

Tire Pressure and Regular Maintenance

Maintaining the correct tire pressure is important for proper ATV handling and tire service life.

Underinflated tires can deform excessively and may affect wheel and tire performance.

Overinflated tires can also change traction and ride characteristics.

Check tire pressure regularly when the tires are cold, using a gauge suitable for low-pressure ATV tires.

Inspect the valve stem for cracking, deformation and leakage.

Always follow the inflation specifications applicable to the vehicle and installed tires.

Tire Valve vs. Suspension Grease Fitting

A tire valve and a suspension grease fitting are different mechanical components.

  • 100537 – Tire Valve Stem: Used to inflate tires and help retain air pressure.
  • 108287 – Grease Fitting: Used to inject grease into compatible mechanical lubrication points.

The tire valve is mounted on a compatible wheel rim, while the grease fitting is installed at a mechanical lubrication point.

These parts are not interchangeable.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 100537
  • Manufacturer description: Valve Stem
  • Application: Tire inflation
  • Location: Compatible front and rear wheel rims
  • Category: Wheels, tires and suspension

Part number 100537 is also listed for several other TAO MOTORS vehicles, including the REX 125 and certain compatible ATVs, scooters and go-karts.

Always confirm the original part number and wheel rim mounting specifications before ordering for another vehicle.

Technical Specifications

  • Part number: 100537
  • Part name: Tire Valve Stem
  • Alternate names: Tire Inflation Valve / Wheel Valve
  • Component type: Tire inflation valve
  • Listed materials: Rubber and metal
  • Function: Tire inflation and air pressure retention
  • Mounting location: Compatible wheel rims
  • Application: Front and rear wheels
  • ATA125-K front diagram position: 21
  • Quantity listed for front wheels: 2
  • ATA125-K rear diagram position: 20
  • Quantity listed for rear wheels: 2
  • Rim mounting diameter: Verify on the original component
  • Valve length: Verify on the original component
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Packaging: Sold individually
  • Quantity included: 1 tire valve
  • Tire and wheel rim: Not included

Frequently Asked Questions

What is the purpose of tire valve 100537?

It allows a tire to be inflated and helps prevent air from escaping when the valve and its mounting are functioning correctly.

Is this valve compatible with the RAPTOR 125 ATV?

Yes. Part number 100537 appears in the TAO MOTORS ATA125-K family front and rear wheel parts catalogs.

Can this valve be used on front and rear wheels?

The same reference is listed for the corresponding front and rear wheel assemblies. Verify the actual rims before installation.

How many valves are used on the RAPTOR 125?

The ATA125-K parts listings identify two front valves and two rear valves, for a total of four valves in the corresponding wheel assemblies.

Does the valve include a tire or wheel rim?

No. This listing includes the tire valve only. Tires and wheel rims are sold separately.

Why does my tire lose air around the valve?

Possible causes include cracked rubber, a damaged internal valve mechanism or poor sealing between the valve and rim.

Can I use any universal tire valve?

No. The mounting diameter, length and valve configuration must match the compatible wheel rim.

Is this a genuine OEM replacement part?

Yes. This listing is for genuine OEM TAO MOTORS replacement part number 100537.

Is the tire valve sold individually?

Yes. One valve stem is included per quantity ordered. To purchase four valves, select a quantity of four.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts catalog includes tire valve stems, front and rear tires, wheel rims, hubs, bearings, mounting hardware and other replacement components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

102894 Spindle raptor 125

Specific References