• New
3 Front Suspension Locknut...
  • 3 Front Suspension Locknut...

3 Front Suspension Locknut TAO MOTORS RAPTOR 125 ATV

$0.99
Il n'y a pas encore d'avis.
105254 M10 x 1.25 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

Genuine OEM hex locknut designed for compatible mechanical fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.

Features an M10 metric fine thread with a 1.25 mm thread pitch.

Its self-locking design helps reduce loosening caused by vibration and movement during normal ATV operation.

Listed in the ATA125-K front suspension parts catalog and used in corresponding mechanical assemblies.

Ideal for replacing a worn, damaged or missing original locknut.

OEM part number: 105254.

Thread size: M10 x 1.25 mm.

Sold individually – One hex locknut included.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

M10 x 1.25 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

The 105254 Hex Locknut is a genuine OEM TAO MOTORS replacement fastener designed for compatible mechanical assemblies on the RAPTOR 125cc ATV.

Identified in the manufacturer's parts catalog as Locknut M10 x 1.25, this component features a nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.

Its self-locking design provides additional resistance to loosening caused by vibration when installed according to the manufacturer's specifications.

Part number 105254 is listed in the TAO MOTORS ATA125-K front suspension parts catalog and is also used in other compatible mechanical assemblies.

This fastener is an ideal replacement for worn, damaged or missing factory locknuts.

IMPORTANT: This locknut is sold individually. One M10 x 1.25 hex locknut is included per quantity ordered, not a complete fastening set.

Why Choose the Genuine OEM 105254 Hex Locknut?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 105254.
  • Listed for the RAPTOR 125cc ATV.
  • M10 nominal thread diameter.
  • Fine thread pitch of 1.25 mm.
  • Hexagonal six-sided design.
  • Self-locking fastening configuration.
  • Helps resist loosening caused by vibration.
  • Listed in the ATA125-K front suspension assembly.
  • Suitable for compatible mechanical mounting applications.
  • Replaces damaged, worn or missing original locknuts.
  • Sold individually.

An Important Front Suspension Fastening Component

The TAO MOTORS RAPTOR 125 front suspension includes control arms, shock absorbers, nylon bushings, mounting spacers, bolts and retaining hardware.

These components work together to guide the front wheel assemblies and maintain the suspension geometry specified by the manufacturer.

Mechanical fasteners must remain properly installed during ATV operation.

The 105254 hex locknut is one of the fastening components listed in the front suspension system.

Its locking function helps maintain the corresponding mechanical connection when installed and tightened correctly.

Using the correct OEM replacement fastener helps preserve the original mounting configuration.

Self-Locking Design for Vibration Resistance

ATVs are exposed to vibration, suspension movement and repeated mechanical loads during normal recreational use.

A self-locking nut is designed to provide additional resistance to loosening compared with a conventional non-locking hex nut.

This feature is particularly useful in assemblies where secure fastening is essential.

The 105254 locknut is designed for the corresponding TAO MOTORS mounting applications.

The exact locking mechanism should be verified on the stocked component. The manufacturer designation alone does not confirm whether the nut contains a nylon insert or another locking feature.

Important: A self-locking feature does not replace proper tightening to the manufacturer's required specifications.

Original M10 x 1.25 Fine Thread

Part number 105254 features the following nominal specifications:

  • Thread diameter: M10 (10 mm).
  • Thread pitch: 1.25 mm.
  • Thread type: Metric fine thread.
  • Shape: Hexagonal.
  • Fastener type: Self-locking nut.
  • OEM reference: 105254.

The thread pitch represents the distance between consecutive threads.

An M10 x 1.25 nut has a different thread pitch from an M10 x 1.5 nut.

These fasteners must not be substituted for one another.

Using the wrong thread pitch can damage the bolt or threaded mounting component.

Always verify the original fastener dimensions before ordering or installation.

Application in the RAPTOR 125 Front Suspension

The TAO MOTORS ATA125-K front suspension parts catalog identifies the 105254 Hex Locknut at diagram position 3.

The catalog lists a quantity of 8 locknuts for the corresponding complete front suspension assembly.

Other components listed in this assembly include:

  • 105027: M10 x 1.25 x 70 mm Hex Flange Bolt.
  • 112931: Front Suspension Arm Spacer.
  • 105254: M10 x 1.25 Hex Locknut.
  • 603855: Upper A-Arm.
  • 112930: Nylon Suspension Bushing.
  • 112934: Suspension Sealing Cover.

Each component performs a different function within the front suspension assembly.

The correct bolts, spacers, bushings and locknuts must be installed according to the original vehicle configuration.

This listing includes only the 105254 hex locknut. Bolts and other suspension components are sold separately.

Difference Between Locknut 105254 and Castle Nut 105320

Different types of M10 x 1.25 fastening hardware are used in the TAO MOTORS front suspension.

  • 105254 – M10 x 1.25 Hex Locknut: A locking nut intended for the corresponding mechanical assemblies.
  • 105320 – M10 x 1.25 Castle Nut: A castellated nut designed for a compatible cotter pin retaining arrangement.

Although these two parts share the same nominal thread diameter and pitch, they have different fastening and retaining configurations.

Part numbers 105254 and 105320 should not be considered interchangeable.

Always use the specific fastener required for the original mounting location.

When Should a Hex Locknut Be Replaced?

Suspension fastening hardware should be inspected during maintenance and whenever the corresponding mechanical assembly is disassembled.

Replacement may be required if the original locknut shows:

  • Worn or damaged internal threads.
  • A deteriorated locking feature.
  • Visible deformation.
  • Rounded or damaged hexagonal surfaces.
  • Excessive corrosion.
  • Damage caused by incorrect tightening.
  • Damage during removal.
  • A missing original fastening component.

Some self-locking fasteners can lose locking resistance after repeated removal and installation.

Follow the manufacturer's requirements concerning reuse and replacement.

For safety-related mechanical assemblies, replace a locknut when its condition or locking ability is uncertain.

Replacement and Installation

Before installation, compare the new locknut with the original part.

Verify the thread diameter, pitch, hexagonal configuration and locking design.

Inspect the mating bolt or threaded component for damaged threads.

Install the nut using the manufacturer's recommended procedure and appropriate tools.

Follow the tightening specifications for the corresponding suspension or mechanical assembly.

Do not force a nut that does not thread correctly, as this may indicate a damaged or incompatible thread.

After installation, verify that the fastening assembly is secure and that the suspension moves correctly without abnormal play.

Professional installation is recommended for safety-critical suspension and steering fasteners.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO.
  • Model: RAPTOR 125.
  • Engine size: 125cc.
  • OEM part number: 105254.
  • Manufacturer description: Locknut M10 x 1.25.
  • Nominal thread size: M10 x 1.25 mm.
  • Application: Corresponding mechanical fastening assemblies.
  • Catalog location: Front suspension.
  • Category: Front end and suspension / Fasteners.

Part number 105254 is also used on several other TAO MOTORS vehicles and certain compatible ATV and dirt bike applications.

Always verify the original part number and thread specifications before ordering for another vehicle.

Technical Specifications

  • Part number: 105254.
  • Part name: Hex Locknut.
  • Alternate name: Self-Locking Hex Nut.
  • Nominal thread diameter: M10 (10 mm).
  • Thread pitch: 1.25 mm.
  • Thread type: Metric fine thread.
  • Body shape: Hexagonal.
  • Fastener type: Self-locking nut.
  • Application: Compatible suspension and mechanical fastenings.
  • ATA125-K diagram position: 3.
  • Quantity listed for front suspension: 8.
  • Quality: Genuine OEM replacement part.
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV.
  • Package: Sold individually.
  • Quantity included: 1 locknut.
  • Bolts and other hardware: Not included.

Frequently Asked Questions

What is the purpose of the 105254 hex locknut?

It helps secure compatible mechanical fastening assemblies while providing resistance to loosening caused by vibration.

What is the thread size?

Part number 105254 features an M10 nominal thread diameter of 10 mm and a 1.25 mm thread pitch.

Is this locknut compatible with the RAPTOR 125 ATV?

Yes. Part number 105254 is listed in the TAO MOTORS ATA125-K front suspension parts catalog.

How many locknuts are listed for the front suspension?

The ATA125-K catalog lists eight locknuts with part number 105254 for the corresponding complete front suspension assembly.

What is the difference between 105254 and 105320?

Part number 105254 is a hex locknut, while 105320 is a castle nut used with a compatible cotter pin retaining arrangement.

Can I use an M10 x 1.5 nut instead?

No. The 1.5 mm thread pitch is different from the 1.25 mm pitch required for part number 105254.

Can this self-locking nut be reused?

Reuse depends on the locking design, condition of the fastener and manufacturer's requirements. Replace the nut if its locking feature is damaged or reuse is not permitted.

Is this a genuine OEM replacement part?

Yes. This listing is for genuine OEM TAO MOTORS replacement part number 105254.

Is the locknut sold individually?

Yes. One locknut is included per quantity ordered. To purchase eight locknuts, select a quantity of eight.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts catalog includes locknuts, bolts, washers, suspension bushings, mounting spacers, control arms, shock absorbers and other mechanical components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle assembly, maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

105254 Écrou M10 x 1,25

Specific References