23 Front Ball Joint TAO...
  • 23 Front Ball Joint TAO...
  • 23 Front Ball Joint TAO...

23 Front Ball Joint TAO MOTORS RAPTOR 125 ATV

$39.99
Il n'y a pas encore d'avis.
101486 M14 x 1.5 x 60 mm Ball Joint for TAO MOTORS RAPTOR 125 ATV

Genuine OEM front ball joint designed for compatible suspension and steering assemblies on the TAO MOTORS RAPTOR 125cc ATV.

Part number 101486, with nominal specifications of M14 x 1.5 x 60 mm.

Allows articulated movement between corresponding front-end components and helps maintain proper suspension and steering operation.

Ideal for replacing a worn, damaged or loose original ball joint.

Helps restore steering precision and the original front suspension configuration.

Sold individually – One ball joint included.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

M14 x 1.5 x 60 mm Front Ball Joint for TAO MOTORS RAPTOR 125 ATV

The 101486 Front Ball Joint is a genuine OEM TAO MOTORS replacement part intended for compatible front suspension and steering assemblies on the RAPTOR 125cc ATV.

This mechanical component provides an articulated connection between corresponding front-end suspension or steering components.

Part number 101486 is identified in TAO MOTORS parts catalogs with nominal dimensions of M14 x 1.5 x 60 mm.

A ball joint allows connected mechanical components to move at varying angles as the suspension and steering systems operate.

Proper ball joint operation is important for maintaining front wheel guidance, steering response and suspension movement.

This genuine OEM component is intended to replace a worn, damaged or excessively loose original ball joint.

IMPORTANT: This ball joint is sold individually. One ball joint is included per quantity ordered. The inclusion of nuts and additional mounting hardware must be verified separately.

Why Choose the Genuine OEM 101486 Ball Joint?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 101486.
  • Listed for the RAPTOR 125cc ATV.
  • Nominal reference dimensions: M14 x 1.5 x 60 mm.
  • Articulated mechanical joint design.
  • Used in corresponding front-end assemblies.
  • Helps maintain suspension and steering movement.
  • Allows angular movement between connected components.
  • Contributes to proper front wheel guidance.
  • Replaces worn or damaged original ball joints.
  • Helps maintain the original mounting configuration.
  • Sold individually.

An Important Front Suspension and Steering Component

The TAO MOTORS RAPTOR 125 front-end system contains several mechanical components, including control arms, wheel spindles, shock absorbers, bushings and steering connections.

These components work together to allow the front wheels to move over uneven terrain while responding to steering input.

A ball joint provides an articulated mechanical connection between corresponding components.

Unlike a rigid connection, it allows movement through varying angles while maintaining the intended mechanical relationship between the assembled parts.

This movement is important for proper suspension and steering operation.

Excessive play in a ball joint may affect steering precision and the stability of the associated front-end assembly.

Nominal M14 x 1.5 x 60 mm Specifications

The 101486 ball joint is identified with the following reference dimensions:

  • Main threaded section: M14.
  • Nominal thread diameter: 14 mm.
  • Thread pitch: 1.5 mm.
  • Additional reference dimension: 60 mm.
  • Component type: Articulated ball joint.
  • OEM part number: 101486.

The thread diameter and pitch are important characteristics when selecting a replacement.

The 60 mm measurement is part of the manufacturer's dimensional designation and should not automatically be interpreted as the complete overall length of every commercially available version.

Important: A ball joint with the same M14 x 1.5 thread is not necessarily interchangeable if its ball stud, mounting dimensions or overall design differs.

Always compare the original part number and physical configuration before installation.

Application in the RAPTOR 125 Front-End Assembly

Part number 101486 appears at diagram position 23 in the ATA125-K family front suspension parts catalog.

The catalog lists 2 ball joints in the complete corresponding front-end assembly.

Depending on the parts supplier, this component may be described as an upper A-arm ball joint or as an articulated front steering component.

Because terminology can differ between catalogs, verify the exact mounting location on the specific RAPTOR 125 configuration being repaired.

The catalog quantity refers to the complete vehicle assembly, not the number of ball joints included with this product.

Signs of a Worn or Damaged Ball Joint

Front-end ball joints are exposed to repeated movement, vibration and mechanical loads during ATV operation.

Over time, these conditions may contribute to wear or deterioration.

Common warning signs include:

  • Excessive play in the ball joint.
  • Clunking or unusual mechanical noise.
  • Abnormal movement in the front suspension.
  • Reduced steering precision.
  • Restricted or binding joint movement.
  • A cracked or damaged protective boot, when fitted.
  • Visible damage following an impact.
  • Irregular tire wear that may be associated with front-end alignment problems.

These symptoms may also result from worn bushings, control arms, mounting hardware or other steering components.

Inspect the entire front-end assembly before determining the source of the problem.

Why Replace a Ball Joint with Excessive Play?

A properly functioning ball joint allows the intended articulated movement without excessive looseness.

When the joint becomes worn, it may affect the positioning of the connected suspension and steering components.

Excessive play can contribute to vibration, mechanical noise and inconsistent steering response.

Replacing a defective joint with the correct genuine OEM component helps restore the intended mechanical connection.

Because this component is associated with front suspension and steering operation, any significant defect should be corrected before returning the ATV to service.

Replacement and Installation

Before installation, compare the new ball joint directly with the original component.

Verify the threaded section, mounting dimensions, ball stud configuration and overall design.

Inspect the corresponding control arm or steering component for cracks, deformation or damaged threads.

Follow the manufacturer's recommended installation procedure and tightening specifications.

Use the correct nuts, retaining hardware and any other components specified for the original assembly.

After installation, verify that the joint moves correctly without binding or excessive play.

Inspect the front suspension and steering system before operating the ATV.

A front wheel alignment check may be necessary following replacement.

Professional installation is recommended for safety-critical steering and suspension components.

Compatibility with Other TAO MOTORS ATVs

Part number 101486 is also listed for several other TAO MOTORS vehicles.

Some parts catalogs identify compatible applications involving the REX, T-FORCE, NEW T-FORCE and related ATV models.

However, mounting configurations may vary by model and production version.

Always verify the original part number, mounting dimensions and ball joint design before ordering for another vehicle.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 101486
  • Part description: Front Ball Joint
  • Nominal specifications: M14 x 1.5 x 60 mm
  • Application: Corresponding front-end articulated assembly
  • Category: Front end and suspension

Confirm the exact mounting position using the original component and the applicable vehicle parts diagram.

Technical Specifications

  • Part number: 101486
  • Part name: Front Ball Joint
  • Alternate name: Front-End Articulated Joint
  • Main thread: M14 x 1.5 mm
  • Nominal thread diameter: 14 mm
  • Thread pitch: 1.5 mm
  • Additional reference dimension: 60 mm
  • Component type: Mechanical ball joint
  • Application: Front suspension and steering
  • Location: Corresponding front-end assembly
  • ATA125-K diagram position: 23
  • Quantity listed for complete assembly: 2
  • Category: Front end and suspension
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 ball joint
  • Nuts and mounting accessories: Inclusion not confirmed

Frequently Asked Questions

What is the purpose of the 101486 ball joint?

It provides an articulated connection between corresponding front-end components and helps maintain proper suspension and steering movement.

What are its dimensions?

Part number 101486 is designated M14 x 1.5 x 60 mm, including a 14 mm nominal main thread diameter and a 1.5 mm thread pitch.

Is this ball joint compatible with the RAPTOR 125 ATV?

Yes. Part number 101486 is listed at position 23 in the ATA125-K family front suspension catalog. Verify the corresponding mounting configuration on your ATV.

Is this a suspension ball joint or steering joint?

The part is listed in the front-end assembly. Supplier terminology varies between an A-arm ball joint and a steering-related articulated joint. Verify the exact installation location on the vehicle.

How do I know when a ball joint needs replacement?

Excessive play, binding, abnormal noise or visible damage may indicate that the ball joint requires inspection or replacement.

Are the mounting nuts included?

The exact accessory package has not been confirmed. Check the stocked product before assuming that nuts or additional fasteners are included.

Can this ball joint be used on both sides?

The ATA125-K catalog lists two units of part number 101486 in the complete assembly. Confirm the appropriate mounting positions before installation.

Is this a genuine OEM replacement part?

Yes. This listing is for genuine OEM TAO MOTORS replacement part number 101486.

Is the ball joint sold individually?

Yes. One ball joint is included per quantity ordered. To purchase two ball joints, select a quantity of two.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts selection includes ball joints, suspension arms, bushings, mounting spacers, shock absorbers, locknuts, bolts and other front-end components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle assembly, maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

101486-Ball Joint

Specific References