Genuine OEM hex flange bolt designed for front suspension fastening applications on the TAO MOTORS RAPTOR 125cc ATV.
Features an M10 nominal diameter, fine 1.25 mm thread pitch and 40 mm nominal length.
Its hexagonal head with integrated flange provides an enlarged bearing surface for mechanical mounting assemblies.
Ideal for replacing a worn, damaged or missing original bolt during front shock absorber and suspension repairs.
Dimensions: M10 x 1.25 x 40 mm.
Sold individually.
Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.
Security garantes
Quick delivery
The 105006 M10 x 1.25 x 40 mm Hex Flange Bolt is a genuine OEM TAO MOTORS replacement fastener designed for compatible front suspension assemblies on the RAPTOR 125cc ATV.
This bolt is identified in the manufacturer's parts catalog as a Hex Flange Bolt M10x1.25x40.
It features a 10 mm nominal diameter, a fine thread pitch of 1.25 mm and a 40 mm nominal length.
Part number 105006 is listed in the front suspension assembly of the ATA125-K vehicle family, including mounting locations associated with the front shock absorbers.
It is ideal for replacing a worn, damaged, bent or missing original fastener while maintaining the specified factory mounting dimensions.
IMPORTANT: This bolt is sold individually. One bolt is included per quantity ordered.
The front suspension of the TAO MOTORS RAPTOR 125 includes upper and lower A-arms, shock absorbers, bushings, spacers and mounting hardware.
Bolts play an essential role in securing these components in their intended positions.
During ATV operation, suspension assemblies are subjected to vibration and mechanical loads as the vehicle travels over uneven terrain.
A bolt showing damaged threads, bending or other visible defects should be inspected and replaced when necessary.
Using the correct genuine OEM fastener helps preserve the original mounting dimensions and configuration.
The 105006 bolt is identified as a Hex Flange Bolt.
This design features a six-sided hexagonal head that can be tightened with an appropriate wrench or socket.
The integrated flange provides an enlarged bearing surface beneath the head to help distribute clamping force over the mounting component.
Because the head design is part of the original fastening specification, it should be matched when selecting a replacement.
A conventional bolt with similar diameter and length is not necessarily an equivalent replacement if its head configuration or mechanical specifications differ.
The 105006 bolt features the following nominal specifications:
The 1.25 mm fine thread pitch is an essential characteristic when choosing the correct replacement fastener.
Important: An M10 x 1.5 mm bolt has a different thread pitch and must not be substituted for this M10 x 1.25 mm bolt.
Using the wrong thread pitch may damage the nut, threaded component or mounting assembly.
The ATA125-K front suspension parts catalog identifies part number 105006 at diagram position 12.
The diagram shows this fastener at mounting locations associated with the front shock absorbers.
A quantity of 4 bolts is listed for the complete front suspension assembly.
This is the quantity specified in the vehicle assembly, not the number of bolts included in this product listing.
To replace one bolt, order a quantity of 1. To replace all four corresponding bolts, select a quantity of 4 after confirming your vehicle's configuration.
Front suspension fasteners should be inspected during routine maintenance, suspension repairs or after significant impacts.
Common reasons for replacement include:
Inspect the associated nuts, bushings, mounting brackets and other suspension components to determine whether additional repairs are necessary.
Before installation, compare the new bolt with the original fastener to verify the diameter, length, thread pitch and head configuration.
Inspect the mating nut or threaded component and the surrounding mounting surfaces for wear or damage.
Start the bolt carefully and never force incompatible threads.
Follow the manufacturer's specified tightening torque and assembly procedure for the particular mounting location.
If the assembly uses a locking nut or other retaining hardware, follow the manufacturer's instructions regarding its installation and replacement.
After reassembly, ensure that the shock absorbers and suspension components are securely mounted and move without abnormal play.
Inspect the complete front suspension before operating the ATV.
Part number 105006 is also used on various other TAO MOTORS vehicles, including certain REX and BOULDER ATV models.
Always verify the original part number and fastening specifications before ordering for another vehicle.
It has an M10 nominal diameter of 10 mm, a fine thread pitch of 1.25 mm and a nominal length of 40 mm.
Part number 105006 is listed in the front suspension assembly, including mounting locations associated with the front shock absorbers in the ATA125-K parts diagram.
The ATA125-K parts catalog lists four bolts with part number 105006 for the complete front suspension assembly. Verify the exact configuration of your ATV before ordering.
Yes. The manufacturer's Hex Flange Bolt designation confirms a hexagonal head with an integrated flange.
No. Part number 105006 has a 1.25 mm thread pitch. An M10 x 1.5 mm bolt has a different thread and is not interchangeable.
Yes. It is a genuine OEM TAO MOTORS replacement fastener.
Yes. Each quantity ordered includes one bolt. To purchase four bolts, select a quantity of four.
At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.
Our inventory includes bolts, nuts, washers, bushings, mounting spacers, suspension arms, shock absorbers and other mechanical components.
Benefit from our customer service, replacement parts selection and experience with recreational vehicle maintenance and repairs.
EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.
www.eco-bike.ca