24 Ball Joint Locknut TAO...
  • 24 Ball Joint Locknut TAO...
  • 24 Ball Joint Locknut TAO...

24 Ball Joint Locknut TAO MOTORS RAPTOR 125 ATV

$1.99
Il n'y a pas encore d'avis.
105263 M14 x 1.5 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

Genuine OEM hex locknut designed for compatible front suspension and ball joint fastening assemblies on the TAO MOTORS RAPTOR 125cc ATV.

Features an M14 nominal thread diameter of 14 mm and a fine thread pitch of 1.5 mm.

Listed in the front suspension parts catalog alongside ball joint part number 101486.

Helps maintain the corresponding mechanical fastening and original mounting configuration.

Ideal for replacing a worn, damaged or missing original locknut.

Thread size: M14 x 1.5 mm.

Sold individually – One hex locknut.

Genuine TAO MOTORS OEM replacement part available at EcoBike Canada.

 

Security garantes

 

Quick delivery

M14 x 1.5 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

The 105263 M14 x 1.5 Hex Locknut is a genuine OEM TAO MOTORS replacement fastener designed for compatible front suspension assemblies on the RAPTOR 125cc ATV.

Identified in the parts catalog as Locknut or Hex Locknut M14 x 1.5, this component features a nominal thread diameter of 14 mm and a fine thread pitch of 1.5 mm.

Part number 105263 is listed in the ATA125-K front suspension assembly near ball joint part number 101486.

Its hexagonal design allows installation and tightening with an appropriate wrench.

The locknut provides fastening retention for the corresponding mechanical assembly when installed according to the manufacturer's specifications.

It is ideal for replacing a worn, damaged or missing original locknut while preserving the required factory thread dimensions.

IMPORTANT: This locknut is sold individually. One M14 x 1.5 locknut is included per quantity ordered. Ball joints and additional mounting components are sold separately.

Why Choose the Genuine OEM 105263 Hex Locknut?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 105263.
  • Listed for the RAPTOR 125cc ATV.
  • M14 nominal thread diameter (14 mm).
  • Fine thread pitch of 1.5 mm.
  • Manufacturer designation: Hex Locknut.
  • Six-sided hexagonal design.
  • Used in corresponding front suspension assemblies.
  • Listed alongside ball joint part number 101486.
  • Helps maintain the original mechanical fastening configuration.
  • Replaces damaged, worn or missing factory locknuts.
  • Sold individually.

An Important Front Suspension Fastening Component

The TAO MOTORS RAPTOR 125 front suspension system includes several mechanical components, including suspension control arms, ball joints, wheel spindles, mounting bolts and retaining nuts.

These components must remain correctly assembled during normal vehicle operation.

The 105263 locknut forms part of the fastening hardware listed for the front suspension.

Locknuts are used to help secure mechanical connections exposed to vibration and repeated movement.

Using the correct replacement fastener helps maintain the original mounting configuration and specified thread dimensions.

Damaged or incompatible hardware should not be used in important front suspension or steering connections.

Precise M14 x 1.5 Fine Thread

The 105263 hex locknut features the following specifications:

  • Nominal diameter: M14 (14 mm).
  • Thread pitch: 1.5 mm.
  • Thread type: Metric fine thread.
  • Shape: Hexagonal.
  • Fastener type: Locknut.
  • OEM reference: 105263.

The thread pitch represents the distance between consecutive threads.

Both the diameter and pitch must match the corresponding threaded component.

Important: An M14 nut with a different thread pitch is not an appropriate substitute for this M14 x 1.5 mm locknut.

Installing an incompatible nut may damage the mating threads or prevent correct fastening.

Associated with Ball Joint 101486

In the ATA125-K front suspension parts catalog, the following components appear together:

  • 101486: Ball Joint M14 x 1.5 x 60 mm.
  • 105263: M14 x 1.5 Hex Locknut.

The ball joint provides an articulated mechanical connection between corresponding front-end components.

The locknut forms part of the fastening arrangement associated with the assembly.

Correct installation of both components is important for maintaining the intended mechanical connection.

Ball joint 101486 is not included with this locknut.

Difference Between Locknut 105263 and Castle Nut 105326

Several different nut types are used in the TAO MOTORS RAPTOR 125 front suspension.

Two important references are:

  • 105263 – M14 x 1.5 Hex Locknut: Locking nut listed with the front suspension ball joint components.
  • 105326 – M14 x 1.5 Castle Nut: Castellated nut intended for a retaining arrangement using a compatible cotter pin when specified by the manufacturer.

Although these two parts share the same nominal thread diameter and pitch, their fastening designs are different.

The 105263 locknut and 105326 castle nut should not be considered interchangeable.

Always use the fastening type required for the original assembly.

When Should a Locknut Be Replaced?

Front suspension and steering fasteners should be inspected whenever the corresponding mechanical assembly is removed for maintenance.

Replacement may be necessary if the original locknut shows:

  • Damaged or worn internal threads.
  • Visible deformation.
  • Rounded or damaged hexagonal surfaces.
  • Cracking or mechanical damage.
  • Excessive corrosion.
  • A damaged or ineffective locking feature.
  • Damage caused during removal.
  • A missing original fastener.

If the fastener incorporates a locking feature that can deteriorate after removal, follow the manufacturer's recommendations regarding replacement and reuse.

Replacement and Installation

Before installation, compare the replacement locknut with the original component.

Confirm the thread diameter, pitch, thickness and locking configuration.

Inspect the corresponding ball joint or threaded component for damaged threads.

Install the locknut following the manufacturer's specified assembly procedure.

Use an appropriate wrench and follow the required tightening specifications.

After installation, verify that the mechanical connection is securely fastened and free from abnormal movement.

If the repair involves steering components, inspect the front-end alignment as required.

Professional installation is recommended for safety-critical steering and suspension fasteners.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 105263
  • Manufacturer description: Hex Locknut
  • Thread size: M14 x 1.5 mm
  • Application: Compatible front suspension fastenings
  • Associated catalog component: Ball Joint 101486
  • Category: Front end and suspension

Part number 105263 is also listed for certain TAO MOTORS T-FORCE, NEW T-FORCE, MUDHAWK and other ATV models.

Always verify the original part number and fastening configuration before ordering for another vehicle.

Technical Specifications

  • Part number: 105263
  • Part name: Hex Locknut
  • Alternate name: Locking Nut
  • Nominal thread diameter: M14 (14 mm)
  • Thread pitch: 1.5 mm
  • Thread type: Metric fine thread
  • Shape: Hexagonal
  • Component type: Mechanical locknut
  • Application: Front suspension fastening
  • Associated component: 101486 Ball Joint
  • Parts catalog position: Item 24
  • Category: Front end and suspension
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 locknut
  • Ball joint and other hardware: Not included

Frequently Asked Questions

What is the purpose of the 105263 hex locknut?

It helps secure the corresponding mechanical fastening in the front suspension system of the TAO MOTORS RAPTOR 125cc ATV.

What are its thread dimensions?

Part number 105263 features an M14 nominal thread diameter of 14 mm and a fine thread pitch of 1.5 mm.

Is this locknut compatible with the RAPTOR 125 ATV?

Yes. Part number 105263 is listed at position 24 in the RAPTOR 125 front suspension parts category.

Which ball joint is associated with this locknut?

Ball joint 101486 is listed immediately before locknut 105263 in the front suspension parts catalog.

Is part number 105263 a castle nut?

No. The manufacturer's parts listings identify 105263 as a Locknut or Hex Locknut. The M14 x 1.5 castle nut is a separate part, number 105326.

Can I substitute castle nut 105326?

No. The two fasteners have different designs and must not be considered interchangeable simply because they share the same thread dimensions.

Is ball joint 101486 included?

No. This listing includes only the locknut. The ball joint and additional mounting components are sold separately.

Is this a genuine OEM replacement part?

Yes. It is a genuine OEM TAO MOTORS replacement fastener.

Is the locknut sold individually?

Yes. Each quantity ordered includes one hex locknut.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our parts selection includes locknuts, ball joints, suspension arms, bolts, washers, spacers, shock absorbers and other front-end components.

Benefit from our customer service, replacement parts selection and experience with recreational vehicle assembly, maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

105263-Locknut

Specific References