• New
13 Hex Locknut M10 x 1.25...
  • 13 Hex Locknut M10 x 1.25...

13 Hex Locknut M10 x 1.25 TAO MOTORS RAPTOR 125 ATV

$0.99
Il n'y a pas encore d'avis.
105254 Hex Locknut M10 x 1.25 for TAO MOTORS RAPTOR 125 ATV

Genuine OEM hexagonal locknut designed for mechanical fastening applications on the TAO MOTORS RAPTOR 125cc ATV.

Features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm for replacing the corresponding original locknut.

Its self-locking design helps resist loosening caused by vibration during normal ATV operation.

Ideal for replacing a worn, damaged or missing locknut in compatible mechanical and suspension assemblies.

Thread size: M10 x 1.25 mm.

Sold individually.

Available at EcoBike Canada, your supplier of genuine TAO MOTORS replacement parts.

 

Security garantes

 

Quick delivery

M10 x 1.25 Hex Locknut for TAO MOTORS RAPTOR 125 ATV

The 105254 Hex Locknut M10 x 1.25 is a genuine OEM TAO MOTORS replacement fastener designed for mechanical assemblies on the RAPTOR 125cc ATV.

This hexagonal locknut features a nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.

Its locking design helps resist loosening caused by vibration when properly installed according to the manufacturer's specifications.

Part number 105254 is used in compatible mechanical assemblies, including front suspension assemblies on TAO MOTORS ATVs.

It is ideal for replacing a worn, damaged or missing original locknut while preserving the required fastening dimensions.

IMPORTANT: This product is sold individually. One locknut is included per quantity ordered.

Why Choose the Genuine OEM 105254 Hex Locknut?

  • Genuine OEM TAO MOTORS replacement part.
  • Original part number: 105254.
  • Listed for the RAPTOR 125cc ATV.
  • M10 nominal thread diameter (10 mm).
  • Fine thread pitch of 1.25 mm.
  • Hexagonal six-sided design.
  • Self-locking function helps resist vibration-related loosening.
  • Designed for compatible mechanical fastening applications.
  • Suitable for ATV maintenance and repairs.
  • Sold individually.

Self-Locking Design for Vibration Resistance

ATVs operate under conditions that can expose mechanical components to repeated vibration and movement.

A locknut is designed to provide additional resistance to loosening compared with a conventional hex nut.

This makes the correct locking fastener important in assemblies that require secure attachment.

The genuine OEM 105254 locknut is intended to replace the corresponding factory component while maintaining its specified thread dimensions.

Precise M10 x 1.25 Fine Thread

The 105254 locknut features the following specifications:

  • Nominal thread diameter: M10 (10 mm).
  • Thread pitch: 1.25 mm.
  • Shape: Hexagonal.
  • Fastener type: Self-locking nut.

The 1.25 mm fine thread pitch is an essential specification when choosing the correct replacement fastener.

Important: An M10 x 1.5 mm standard-thread nut is not interchangeable with this M10 x 1.25 mm locknut.

Using an incorrect thread pitch may damage the bolt or threaded component.

When Should a Locknut Be Replaced?

Whenever a locknut is removed during maintenance, inspect its threads and locking performance.

A locknut with damaged threads, visible deformation or reduced locking resistance should be replaced.

For suspension assemblies and other safety-critical fastenings, follow the manufacturer's recommendations concerning locknut replacement and reuse.

The self-locking feature does not replace proper tightening. Always use the correct torque specification for the applicable assembly.

Replacement and Installation

Before installation, confirm that the nut diameter and thread pitch match the bolt or threaded stud.

Inspect the mating threads and mounting surfaces for wear or damage.

Install the locknut without forcing incompatible threads and tighten according to the manufacturer's requirements.

After completing the repair, verify that all associated mechanical components are correctly secured before operating the ATV.

Vehicle Compatibility

  • Brand: TAO MOTORS / TAOTAO
  • Model: RAPTOR 125
  • Engine size: 125cc
  • OEM part number: 105254
  • Thread size: M10 x 1.25 mm
  • Application: Compatible mechanical and suspension fastenings
  • Category: Front suspension and fastening hardware

Before ordering, compare the part number, thread specifications and locknut design with your original fastener to confirm compatibility.

Technical Specifications

  • Part number: 105254
  • Part name: Hex Locknut
  • Nominal diameter: M10 (10 mm)
  • Thread pitch: 1.25 mm
  • Thread type: Metric fine thread
  • Shape: Hexagonal
  • Fastener type: Self-locking nut
  • Category: Suspension and fastening hardware
  • Quality: Genuine OEM replacement part
  • Vehicle: TAO MOTORS RAPTOR 125cc ATV
  • Package: Sold individually
  • Quantity included: 1 locknut

Frequently Asked Questions

What are the dimensions of the 105254 locknut?

It features an M10 nominal thread diameter of 10 mm and a fine thread pitch of 1.25 mm.

What is the difference between a regular hex nut and a locknut?

A locknut incorporates a locking feature designed to provide additional resistance to loosening caused by vibration.

Can I replace it with an M10 x 1.5 nut?

No. Part number 105254 requires a 1.25 mm thread pitch. An M10 x 1.5 nut has a different thread and is not a suitable replacement.

Is this locknut compatible with the RAPTOR 125 ATV?

Yes. Part number 105254 is listed among the compatible fastening components for the TAO MOTORS RAPTOR 125cc ATV.

Is this a genuine OEM replacement part?

Yes. It is a genuine OEM TAO MOTORS replacement fastener.

Is the locknut sold individually?

Yes. Each quantity ordered includes one locknut. To purchase four locknuts, select a quantity of four.

Why Buy TAO MOTORS Parts from EcoBike?

At EcoBike Canada, we offer a wide selection of genuine OEM replacement parts for TAO MOTORS ATVs.

Our inventory includes nuts, bolts, washers, bushings, mounting brackets, frame components, suspension parts and engine replacement parts.

Benefit from our customer service, replacement parts selection and experience with ATV maintenance and repairs.

EcoBike – Your Canadian Source for Genuine TAO MOTORS OEM Parts.

www.eco-bike.ca

105254 ECROU M10 x 1,25

Specific References